Myreader.co.uk  
uk news, chat and community
   home   |   control panel login   |   archive   |  
 
misc
announce
answers
consultants
d-i-y
environment
environment.conservation
gov.agency.csa
gov.local
gov.social-security
gov.social-work
misc
philosophy.atheism
philosophy.humanism
philosophy.misc
radio.amateur
railway
sci.astronomy
sci.med.nursing
sci.med.pharmacy
sci.misc
sci.weather
singles
telecom
telecom.broadband
telecom.mobile
telecom.voip
test
transport
transport.air
transport.buses
transport.ferry
transport.london
transport.ride-sharing
  
 
date: Thu, 22 May 2008 08:41:59 -0700 (PDT),    group: uk.telecom.broadband        back       
Sync Speed Problem   
In the last few days I have been having a few problems with my
broadband. Last Saturday I got a huge amount of high pitched noise
over the phone line. I thought maybe the micro filters. I removed each
one and after removing one my modem synced at the normal rate. I
thought that was the end it was not. After failing getting some free
filters I and being a bit thrown about something the ISP said on the
phone I decided to test at the test socket. That's where the real
shocker came:

Normal Attenuation since 2006: 53db
Current Attenuation at the test socket: 60db

But if I connect the the faceplate back on and check then I get 53db
attenuation and a normal SNR just a lower speed. The dropwire feeds
directly into the NTE5 and there is no other cable joining with the
dropwire, mean every other telephone connection is connection from the
removable faceplate.

I cant see why this would happen, there is no logical reason that I
could find for this happening. Its clear that the problem is not the
microfilters because I did a direct rj11 to rj11 BT without any
microfilter at the test socket.

The only note to make is that BT have been working in the area in the
last 3 week furiously with today BT lorries parked up close to the
green box by the bank, and thats been 2 days. The other times, they
have been at the closest green box to my house.

So who should I be chasing or what should I be doing to get this
matter sorted, is it an ISP problem or a BT?
date: Thu, 22 May 2008 08:41:59 -0700 (PDT)   author:   naza

Re: Sync Speed Problem   
> Last Saturday I got a huge amount of high pitched noise
> over the phone line.

Could be a BT pairs tracer if it's a rapidly interrupted tone.

> The only note to make is that BT have been working in the area in the
> last 3 week furiously with today BT lorries parked up close to the
> green box by the bank, and thats been 2 days. The other times, they
> have been at the closest green box to my house.

Ask them what work they are doing, then wait until they have
finished whatever they are doing, and check your attenuation
and SNR again.
BT are responsible for the wires between you and the
exchange, but if you report anything other than a voice
fault you may get stung for 150 quid. It's your
ISP's responsibility to report BB faults and get them
fixed, which is where the benefits of a good ISP with
a UK call centre, and good customer service becomes
apparent.
A high pitched noise could be reported as a voice
fault and it helps if the operator you are reporting it to
can hear it as well. "Say again, I can't hear you for this
appalling racket, can you get it fixed?"
date: Thu, 22 May 2008 16:57:34 GMT   author:   unknown

Re: Sync Speed Problem   
After a few hours on the phone, Part of the problem was that there was
a cap on the line. Its been removed and speed seem normal, but not
been able to test it at the test socket yet, the phone is in use.

Bandwidth Management has got really sophisticated if they are able to
change the attenuation on the line, if that is the case.
date: Thu, 22 May 2008 10:07:06 -0700 (PDT)   author:   naza

Re: Sync Speed Problem   
naza wrote:

> In the last few days I have been having a few problems with my
> broadband. Last Saturday I got a huge amount of high pitched noise
> over the phone line. I thought maybe the micro filters. I removed each
> one and after removing one my modem synced at the normal rate. I
> thought that was the end it was not. After failing getting some free
> filters I and being a bit thrown about something the ISP said on the
> phone I decided to test at the test socket. That's where the real
> shocker came:
>
> Normal Attenuation since 2006: 53db
> Current Attenuation at the test socket: 60db
>
> But if I connect the the faceplate back on and check then I get 53db
> attenuation and a normal SNR just a lower speed. The dropwire feeds
> directly into the NTE5 and there is no other cable joining with the
> dropwire, mean every other telephone connection is connection from the
> removable faceplate.
>
> I cant see why this would happen, there is no logical reason that I
> could find for this happening. Its clear that the problem is not the
> microfilters because I did a direct rj11 to rj11 BT without any
> microfilter at the test socket.
>
> The only note to make is that BT have been working in the area in the
> last 3 week furiously with today BT lorries parked up close to the
> green box by the bank, and thats been 2 days. The other times, they
> have been at the closest green box to my house.
>
> So who should I be chasing or what should I be doing to get this
> matter sorted, is it an ISP problem or a BT?

BT won't talk to you about it unless you're a BT Broadband customer. You
need to talk to your ISP but God help you if it's one of the major
consumer ones who mostly don't give a rat's arse about anything other than
taking your money.

Graham
date: Thu, 22 May 2008 19:54:37 +0100   author:   Eeyore

Re: Sync Speed Problem   
naza wrote:
> The only note to make is that BT have been working in the area in the
> last 3 week furiously with today BT lorries parked up close to the
> green box by the bank, and thats been 2 days. The other times, they
> have been at the closest green box to my house.

Spooks.

-- 
Adrian C
date: Sat, 24 May 2008 15:24:56 +0100   author:   Adrian C lid

Google
 
Web myreader.co.uk


    COPYRIGHT 2007, YARDI TECHNOLOGY LIMITED, ALL RIGHT RESERVE  |   contact us