I wonder if anyone has a readable diagram, of how the spaghetti junction of 
wires that lurks behind the speed control housing of a Bridgeport table 
feed, should be wired to the microswitches.

I have downloaded several versions of a Bridggy handbook, one diagram claims 
to have been "cleaned" but its of little use.

I need to know what (colour) wires, that come from the black box speed 
control, mounted in the electrical cabinet, go to what terminals of the 
microswitches.Which ones are linked, basically, where they all go !

I have compared with another new machine, but the wire colours seem 
different, and seem to differ in how its wired judging by some permanently 
linked wires in both housings.
Bob

On Sat, 19 Jul 2008 20:50:33 +0100, "Emimec"
 wrote:

>I wonder if anyone has a readable diagram, of how the spaghetti junction of 
>wires that lurks behind the speed control housing of a Bridgeport table 
>feed, should be wired to the microswitches.
>
>I have downloaded several versions of a Bridggy handbook, one diagram claims 
>to have been "cleaned" but its of little use.
>
>I need to know what (colour) wires, that come from the black box speed 
>control, mounted in the electrical cabinet, go to what terminals of the 
>microswitches.Which ones are linked, basically, where they all go !
>
>I have compared with another new machine, but the wire colours seem 
>different, and seem to differ in how its wired judging by some permanently 
>linked wires in both housings.
>Bob 
>
Hi Bob,
I can't help immediately, but there's a working machine at my Dad's
place, I'll try to have a look next time I'm over there - but it won't
be for a couple of weeks.

Richard

"Richard"  wrote in message 
news:1je784hrt25h630bcgqggqcdgnbhueg0d4@4ax.com...
> On Sat, 19 Jul 2008 20:50:33 +0100, "Emimec"
>  wrote:
>
>>I wonder if anyone has a readable diagram, of how the spaghetti junction 
>>of
>>wires that lurks behind the speed control housing of a Bridgeport table
>>feed, should be wired to the microswitches.
>>
>>I have downloaded several versions of a Bridggy handbook, one diagram 
>>claims
>>to have been "cleaned" but its of little use.
>>
>>I need to know what (colour) wires, that come from the black box speed
>>control, mounted in the electrical cabinet, go to what terminals of the
>>microswitches.Which ones are linked, basically, where they all go !
>>
>>I have compared with another new machine, but the wire colours seem
>>different, and seem to differ in how its wired judging by some permanently
>>linked wires in both housings.
>>Bob
>>
> Hi Bob,
> I can't help immediately, but there's a working machine at my Dad's
> place, I'll try to have a look next time I'm over there - but it won't
> be for a couple of weeks.
>
> Richard

Many thanks
Bob

Emimec wrote:
> I wonder if anyone has a readable diagram, of how the spaghetti junction of 
> wires that lurks behind the speed control housing of a Bridgeport table 
> feed, should be wired to the microswitches.
> 
> I have downloaded several versions of a Bridggy handbook, one diagram claims 
> to have been "cleaned" but its of little use.
> 
> I need to know what (colour) wires, that come from the black box speed 
> control, mounted in the electrical cabinet, go to what terminals of the 
> microswitches.Which ones are linked, basically, where they all go !
> 
> I have compared with another new machine, but the wire colours seem 
> different, and seem to differ in how its wired judging by some permanently 
> linked wires in both housings.
> Bob 
> 
> 
Hi
If you have the Quinton Crane drive system I have a diagram "QC-E-3438" 
on which I have added the wire colours used on my machine. If you still 
need this info. I could scan it for you.
Colin In Norfolk

"Colin Ager"  wrote in message 
news:sOKdnQTswOr-DwzVnZ2dneKdnZydnZ2d@pipex.net...
> Emimec wrote:
>> I wonder if anyone has a readable diagram, of how the spaghetti junction 
>> of wires that lurks behind the speed control housing of a Bridgeport 
>> table feed, should be wired to the microswitches.
>>
>> I have downloaded several versions of a Bridggy handbook, one diagram 
>> claims to have been "cleaned" but its of little use.
>>
>> I need to know what (colour) wires, that come from the black box speed 
>> control, mounted in the electrical cabinet, go to what terminals of the 
>> microswitches.Which ones are linked, basically, where they all go !
>>
>> I have compared with another new machine, but the wire colours seem 
>> different, and seem to differ in how its wired judging by some 
>> permanently linked wires in both housings.
>> Bob
> Hi
> If you have the Quinton Crane drive system I have a diagram "QC-E-3438" on 
> which I have added the wire colours used on my machine. If you still need 
> this info. I could scan it for you.
> Colin In Norfolk
>

Yes please
Bob

On Sat, 19 Jul 2008 20:50:33 +0100, "Emimec"
 wrote:

>I wonder if anyone has a readable diagram, of how the spaghetti junction of 
>wires that lurks behind the speed control housing of a Bridgeport table 
>feed, should be wired to the microswitches.
>
>I have downloaded several versions of a Bridggy handbook, one diagram claims 
>to have been "cleaned" but its of little use.
>
>I need to know what (colour) wires, that come from the black box speed 
>control, mounted in the electrical cabinet, go to what terminals of the 
>microswitches.Which ones are linked, basically, where they all go !
>
>I have compared with another new machine, but the wire colours seem 
>different, and seem to differ in how its wired judging by some permanently 
>linked wires in both housings.
>Bob 
>
I have emailed you the info I have on my Dad's m/c. If you've not
received email let me know and I'll try again.

Richard

Emimec wrote:
> "Colin Ager"  wrote in message 
> news:sOKdnQTswOr-DwzVnZ2dneKdnZydnZ2d@pipex.net...
> 
>>Emimec wrote:
>>
>>>I wonder if anyone has a readable diagram, of how the spaghetti junction 
>>>of wires that lurks behind the speed control housing of a Bridgeport 
>>>table feed, should be wired to the microswitches.
>>>
>>>I have downloaded several versions of a Bridggy handbook, one diagram 
>>>claims to have been "cleaned" but its of little use.
>>>
>>>I need to know what (colour) wires, that come from the black box speed 
>>>control, mounted in the electrical cabinet, go to what terminals of the 
>>>microswitches.Which ones are linked, basically, where they all go !
>>>
>>>I have compared with another new machine, but the wire colours seem 
>>>different, and seem to differ in how its wired judging by some 
>>>permanently linked wires in both housings.
>>>Bob
>>
>>Hi
>>If you have the Quinton Crane drive system I have a diagram "QC-E-3438" on 
>>which I have added the wire colours used on my machine. If you still need 
>>this info. I could scan it for you.
>>Colin In Norfolk
>>
> 
> 
> Yes please
> Bob 
> 
> 
I have sent the information you requested. Let me know if it doesn't arrive.

Colin

"Richard"  wrote in message 
news:rvbc945ofvlj4clsf70s9v6edjupdd8rii@4ax.com...
> On Sat, 19 Jul 2008 20:50:33 +0100, "Emimec"
>  wrote:
>
>>I wonder if anyone has a readable diagram, of how the spaghetti junction 
>>of
>>wires that lurks behind the speed control housing of a Bridgeport table
>>feed, should be wired to the microswitches.
>>
>>I have downloaded several versions of a Bridggy handbook, one diagram 
>>claims
>>to have been "cleaned" but its of little use.
>>
>>I need to know what (colour) wires, that come from the black box speed
>>control, mounted in the electrical cabinet, go to what terminals of the
>>microswitches.Which ones are linked, basically, where they all go !
>>
>>I have compared with another new machine, but the wire colours seem
>>different, and seem to differ in how its wired judging by some permanently
>>linked wires in both housings.
>>Bob
>>
> I have emailed you the info I have on my Dad's m/c. If you've not
> received email let me know and I'll try again.
>
> Richard

Didn't get it I'm afraid, my email is, after removing the obvious, 
emimec.19@OBVIOUSbtinternet.com