Myreader.co.uk  
uk news, chat and community
   home   |   control panel login   |   archive   |  
 
rec-sporting
camping
caravanning
caving
climbing
cycling
dancing
driving
fishing.coarse
fishing.game
fishing.sea
motorcaravans
motorcycles
motorcycles.classic
motorcycles.trailriding
motorsport.misc
motorsport.oval-racing
sailing
scouting
shooting.clays
shooting.game
shooting.target
walking
  
 
date: Fri, 25 Jul 2008 06:20:35 +0100,    group: uk.rec.camping        back       
Replacement tent pole set   
Folks


I have lost the entire set of poles for our Outwell Hartford "M" tent.
I thought I packed them away at the end of last season but they aint there now :-(


So a replacement set is needed,and reasonably quickly.
Does anyone know of the best way to approach this?
I have emailed Outwell in the hope being able to buy a set but haven't had a response yet.


I know that I could make up a set from the generic pole kits that you can buy, but as far as I can 
see they are mainly intended to repair existing poles.
I don't know what the correct length should be, or even what diameter the old poles were.


Any suggestions gratefully received.


Cheers - Adam
date: Fri, 25 Jul 2008 06:20:35 +0100   author:   Adam Lipscombe

Re: Replacement tent pole set   
Go and ask same question on www.ukcampsite.co.uk
You will get a bigger audience than here and hopefully some responses.





"Adam Lipscombe"  wrote in message 
news:1216963237.20897.0@proxy00.news.clara.net...
> Folks
>
>
> I have lost the entire set of poles for our Outwell Hartford "M" tent.
> I thought I packed them away at the end of last season but they aint there 
> now :-(
>
>
> So a replacement set is needed,and reasonably quickly.
> Does anyone know of the best way to approach this?
> I have emailed Outwell in the hope being able to buy a set but haven't had 
> a response yet.
>
>
> I know that I could make up a set from the generic pole kits that you can 
> buy, but as far as I can see they are mainly intended to repair existing 
> poles.
> I don't know what the correct length should be, or even what diameter the 
> old poles were.
>
>
> Any suggestions gratefully received.
>
>
> Cheers - Adam
date: Fri, 25 Jul 2008 11:27:14 +0100   author:   dave hall

Google
 
Web myreader.co.uk


    COPYRIGHT 2007, YARDI TECHNOLOGY LIMITED, ALL RIGHT RESERVE  |   contact us