|
|
|
date: Wed, 30 May 2007 13:21:47 GMT,
group: uk.tech.tv.video.pvr
back
Digihome PVR firmware
Does anyone know where version 5.3(UK) [single channel record] or a later version than 1.0(UK) [dual channel record]
can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all the same software.
There doesn't seem to be an off-air download scheduled for the near future so upgrading via the serial link seems to be my best option.
Just hoping.
date: Wed, 30 May 2007 13:21:47 GMT
author: unknown
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
Re: Digihome PVR firmware
wrote in message
news:LTe7i.17905$F_4.3792@newsfe4-gui.ntli.net...
> Does anyone know where version 5.3(UK) [single channel record] or a later
> version than 1.0(UK) [dual channel record]
> can be found for a Digihome PVR80 / PVR160 / DTR0207 or Vestel T810? all
> the same software.
> There doesn't seem to be an off-air download scheduled for the near future
> so upgrading via the serial link seems to be my best option.
> Just hoping.
>
>
>
>
You could try a "forced download".
This one is common, and works with all Thomson boxes - TuTV, SKY etc.,
But you could try it:
1. Menu
2. 4 Set-Up
3. 6 Help
4. Press Remote control keys:1397
5. Scroll down to 10 Force next OAD (Over Air Download)
6. OK
7. Put in standby
OR...
Switch off
Disconnect from power socket
Then whilst pressing together "Power" and "Menu" buttons with one hand -
plug into power outlet
If it goes into standby with both red and green lights illuminated then the
forced download is taking place - leave it to complete.
If that didn't work, try again as above but press together "Menu" and "Rec"
date: Wed, 30 May 2007 20:01:26 +0100
author: delinquent
|
|
|
