Custom steel
Is Breed316 still the place to get custom steel from?
I need a 7*16mm bar, Smartie type ends.
They made my last one and quality was fine, but I'm wondering if all is
still good there - UK only places.
(and custom Ti would be good too for the move to 8mm)
M.
date: Fri, 06 Apr 2007 01:02:35 +0100
author: M.
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
Re: Custom steel
"M." wrote in message
news:46158e1e$0$6961$fa0fcedb@news.zen.co.uk...
> Is Breed316 still the place to get custom steel from?
> I need a 7*16mm bar, Smartie type ends.
> They made my last one and quality was fine, but I'm wondering if all is
> still good there - UK only places.
> (and custom Ti would be good too for the move to 8mm)
>
> M.
As far as I know everything is still hunky dory there M. I used them last
year and got the usual good service, etc. I still think they're a bit on the
pricey side but I guess you can't quite have everything! :o)
Rusty.
date: Fri, 06 Apr 2007 13:46:23 GMT
author: Rusty
|
