Anyone know where I could buy a replacement mitre gauge for my table
saw?


I have a Clarke 10" cheap-o-matic table saw and the mitre gauge on it
was made under license by Fisher-Price ;-)


I know the saw is a bit crap but I wouldn't mind buying a half decent
angley slidey thing to improve it a bit. 


Cheers - ETV

On 22 May 2005 07:06:28 -0700, "Eric The Viking"
 wrote:


>Anyone know where I could buy a replacement mitre gauge for my table
>saw?
>
>
>I have a Clarke 10" cheap-o-matic table saw and the mitre gauge on it
>was made under license by Fisher-Price ;-)
>
>
>I know the saw is a bit crap but I wouldn't mind buying a half decent
>angley slidey thing to improve it a bit. 
>
>
>Cheers - ETV



Have a look at www.rutlands.co.uk

They have a variety of them from 29.95 upwards to a price that may be
more than the saw.   Use "mitre gauge" as a search term.

The Incra ones are especially good.

Most, if not all of these have a bar intended to fit a U.S. table saw
slot of 3/4" by 3/8".   If yours is different, you may need to get a
bar of the correct dimensions or perhaps make one from engineering
plastic.

e.g. Axminster Powertools code APTCSP6


-- 

..andy

To email, substitute .nospam with .gl

Andy

Thanks for that m8,  will take a good look at the site!

ETV