| |
FS: 21" monitor
I no longer need my 21" Compaq QVision 210 monitor. Would anyone like
to make an offer for it? Note that this is a large and heavy item! I
can deliver it to any local buyer. Specs are:
Monitor Type Color Multiple Scan
Picture Tube (diagonal) 21" Full square
Viewable Image Area (diagonal) 19.5" / (49.6 cm)
Dimensions, WxHxD 20" x 19.8" x 22" / 50.7 x 50.2 x 55.9cm
Weight (unpacked) 77lb / 35kg
Dot Pitch 0.26 mm
Energy Star Compliant Yes
Display Resolutions / Refresh Rates (Noninterlaced)
1600 x 1200 60, 70, and 75 Hz
1280 x 1024 60, 75 and 85 Hz
1024 x 768 60, 70, 72 and 75 Hz
800 x 600 72 and 75 Hz
720 x 400 (Text mode) 70Hz
640 x 480 60, and 75 Hz
640 x 350 70 Hz
Preset Display modes Yes
User Programmable Graphic Modes Twelve
Bandwidth 100 MHz
Input Impedance 75 ohms
Horizontal Frequency (Banded/Continuous) 31 to 94 kHz Continuous
Vertical Frequency 48 to 160 Hz
Power Supply(ALS) 90-127 / 195-265 VAC 47-63 Hz
Inrush Current 30 Amps at 120 VAC; 50 Amps at 220 VAC
Maximum Power Rating 175 Watts
Sync Input TTL separate synch
Signal Cable Connectors Detachable 15 pin miniature D-sub to 5 BNC
Anti-glare Yes, with Anti-Static
Asset Management Yes
ISO9241-3 VDT (workplace) Yes
MPR II (Low Emissions) Yes (Model 482T MPR II & TCO)
Plug and Play Yes
Power Management Yes
Standard Controls Contrast, Brightness, Sizing, & Positioning
Advanced Controls: Pincushion (barrel), Trapezoid, Tilt (rotation)
Color temperature Degauss Parallelogram Unbalanced pin
On Screen Display Yes
Factory Pre-Set Display Modes
Resolution Horizontal Sync Rate(kHz) Vertical Sync Rate(Hz)
640 x 350 31.50 + 70.00 -
640 x 480 31.50 - 60.00 -
640 x 480 37.50 - 75.00 -
720 x 400 31.50 - 70.00 +
800 x 600 48.08 + 72.19 +
800 x 600 46.88 + 75.00 +
1024 x 768 48.36 60.00
1024 x 768 56.48 70.07
1024 x 768 57.52 + 71.89 +
1024 x 768 60.02 + 75.03 +
1280 x 1024 63.98 + 60.02 +
1280 x 1024 79.98 + 75.02 +
1280 x 1024 91.15 + 85.02 +
1600 x 1200 75.00 + 60.00 +
1600 x 1200 87.50 + 70.00 +
1600 x 1200 93.75 + 75.00 +
Note: The "+" and "-" indicators are the polarities of the vertical
and horizontal sync signals coming from the PC video controller. The
monitor's video recognition circuits utilize the sync polarities to
determine which preset mode to display.
--
Jeremy C B Nicoll - my opinions are my own.
Date:Thu, 24 Feb 2005 15:04:02 +0000 (GMT)
Author:
|
Re: FS: 21" monitor
> I no longer need my 21" Compaq QVision 210 monitor.
> Inrush Current 30 Amps at 120 VAC; 50 Amps at 220 VAC
11 freakin kilowatts? Is the reason you don't need it that you've
bought an oven? What do you use for fuses, copper boat nails?
============== j-c ====== @ ====== purr . demon . co . uk ==============
Jack Campin: 11 Third St, Newtongrange EH22 4PU, Scotland | tel 0131 660 4760
<http://www.purr.demon.co.uk/jack/> for CD-ROMs and free | fax 0870 0554 975
stuff: Scottish music, food intolerance, & Mac logic fonts | mob 07800 739 557
Date:Thu, 24 Feb 2005 16:56:02 +0000
Author:
|
Re: FS: 21" monitor
In article ,
Jack Campin - bogus address wrote:
> > I no longer need my 21" Compaq QVision 210 monitor.
> > Inrush Current 30 Amps at 120 VAC; 50 Amps at 220 VAC
> 11 freakin kilowatts? Is the reason you don't need it that you've
> bought an oven? What do you use for fuses, copper boat nails?
I must admit that surprised me, but maybe because I don't really
know anything about electronics. It's worked fine on a normal 13A
socket.
--
Jeremy C B Nicoll - my opinions are my own.
Date:Thu, 24 Feb 2005 17:08:58 +0000 (GMT)
Author:
|
Re: FS: 21" monitor
> I must admit that surprised me, but maybe because I don't really
> know anything about electronics. It's worked fine on a normal 13A
> socket.
It's an inrush current, lasts for several milliseconds and then the
monitor settles down to consuming a reasonably steady (and far lower)
current...
Gavin.
Date:Thu, 24 Feb 2005 20:02:24 +0000
Author:
|
Re: FS: 21" monitor
Gavin Saxby wrote:
>> I must admit that surprised me, but maybe because I don't really
>> know anything about electronics. It's worked fine on a normal 13A
>> socket.
>
>
> It's an inrush current, lasts for several milliseconds and then the
> monitor settles down to consuming a reasonably steady (and far lower)
> current...
>
You can't just get the power drawn by multiplying the voltage and current like
that anyway. The current probably isn't in phase with the voltage.
Stewart
--
You are about to enter... The Scary Door...
Date:Fri, 25 Feb 2005 12:55:05 +0000
Author:
|
|