Anybody tried these?

http://www.plumbworld.co.uk/618-1533

In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
   Arthur  wrote:

> Anybody tried these?

> http://www.plumbworld.co.uk/618-1533


Hate those sort of wrenches. What's wrong with a Stillson type?

-- 
*Always borrow money from pessimists - they don't expect it back *

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

"Dave Plowman (News)"  wrote in message
news:4d6e7d3b18dave@davenoise.co.uk...

> In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
>    Arthur  wrote:
> > Anybody tried these?
>
> > http://www.plumbworld.co.uk/618-1533
>
> Hate those sort of wrenches. What's wrong with a Stillson type?


This man has clearly never touched a piece of pipe in his life.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

On Sat, 21 May 2005 10:48:16 +0000 (UTC), Arthur 
wrote:


>Anybody tried these?
>http://www.plumbworld.co.uk/618-1533


Thay've been around for years.  Footprint are probably OK, but a Happy
Shopper one will have a soft nut that chews up from acting as a pivot
and becomes hard to turn for adjustment.

The question really is whether a pair of "mangling pliers" like this,
with gripper teeth rather than flat jaws, really needs to have accurate
size adjustment.  A simple Footprint wrench has either a single pivot
position or a handful of discrete positions and they just let the taper
in the jaws bridge the rest of the gap.

Personally I like Blue Point (cheap Snap-On's) water pump pliers. Well
made and a good price, like a lot of Snap-On stuff is, if only you
bother to read the price lists to find the bargains  (their Allen key
sets are good too)


-- 
 Cats have nine lives, which is why they rarely post to Usenet.

"Arthur"  wrote in message
news:d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...

> Anybody tried these?
>
> http://www.plumbworld.co.uk/618-1533
>


These aren't new, they're called footprints, and have been around for many,
many years.

Why Footprints?  I hear you ask.  Well when you lay them down and press them
into damp sand, they leave an impression like a foot print.  Try it, you'll
see. :-)

BigWallop wrote:

> "Arthur"  wrote in message
> news:d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...
> 
>>Anybody tried these?
>>
>>http://www.plumbworld.co.uk/618-1533
>>
> 
> 
> These aren't new, they're called footprints, and have been around for many,
> many years.
> 
> Why Footprints?  I hear you ask.  Well when you lay them down and press them
> into damp sand, they leave an impression like a foot print.  Try it, you'll
> see. :-)
> 
> 

If they leave a footprint impression in the mother-in-laws skull I might 
just 'get away with it' :)

Arthur

Andy Dingley wrote:

> On Sat, 21 May 2005 10:48:16 +0000 (UTC), Arthur 
> wrote:
> 
> 
>>Anybody tried these?
>>http://www.plumbworld.co.uk/618-1533
> 
> 
> Thay've been around for years.  Footprint are probably OK, but a Happy
> Shopper one will have a soft nut that chews up from acting as a pivot
> and becomes hard to turn for adjustment.
> 
> The question really is whether a pair of "mangling pliers" like this,
> with gripper teeth rather than flat jaws, really needs to have accurate
> size adjustment.  A simple Footprint wrench has either a single pivot
> position or a handful of discrete positions and they just let the taper
> in the jaws bridge the rest of the gap.
> 
> Personally I like Blue Point (cheap Snap-On's) water pump pliers. Well
> made and a good price, like a lot of Snap-On stuff is, if only you
> bother to read the price lists to find the bargains  (their Allen key
> sets are good too)
> 
> 


I've been using a conventional plumbers wrench as a bracer/holder while 
I tighten the nuts.  But I find them a pain in the arse to choose the 
right adjustment for the different widths.  I suppose experienced 
plumbers can do it with a flick of the wrist.  The fuggin show offs :)

Arthur

"Andy Dingley"  wrote in message
news:a86u81185lmc6irbfu16bj1gobfrte7ul1@4ax.com...

> On Sat, 21 May 2005 10:48:16 +0000 (UTC), Arthur 
> wrote:
>
> >Anybody tried these?
> >http://www.plumbworld.co.uk/618-1533
>
> Thay've been around for years.  Footprint are probably OK, but a Happy
> Shopper one will have a soft nut that chews up from acting as a pivot
> and becomes hard to turn for adjustment.
>
> The question really is whether a pair of "mangling pliers" like this,
> with gripper teeth rather than flat jaws, really needs to have accurate
> size adjustment.  A simple Footprint wrench has either a single pivot
> position or a handful of discrete positions and they just let the taper
> in the jaws bridge the rest of the gap.


Footprints are for small bore iron pipes. They are very good at what they
are intended for, which is gripping the pipe. They are not for nuts and the
likes.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Dave Plowman (News)"  wrote in message
news:4d6e7d3b18dave@davenoise.co.uk...

> In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
>    Arthur  wrote:
> > Anybody tried these?
>
> > http://www.plumbworld.co.uk/618-1533
>
> Hate those sort of wrenches. What's wrong with a Stillson type?
>


Agreed, but having a smaller jaw thickness they can be used in places
were the deeper Stillson type wrench will not fit.

Dave Plowman (News) wrote:


> In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
>    Arthur  wrote:
>> Anybody tried these?
> 
>> http://www.plumbworld.co.uk/618-1533
> 
> Hate those sort of wrenches. What's wrong with a Stillson type?


As someone else said footprint-pattern are narrower. They also let you get a
bit of a grip on the pipe by squeezing the handles whereas Stillsons only
tighten as you turn them, so they can fall off before they've got a good
grip. However I think there's an inherent weakness in the design of the
Stillson pattern: I nearly wrecked one (admittedly a cheap clone) trying to
give it some extra welly with a bit of scaffold pole, and the sort of
square collar bit started to split where the pivot pin goes through it. 

I think the ones like this
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=10223
(also known as  Stillson Expert in the Toolstation cat) are inherently
better from this pov. Best of all IMO are the much lighter alloy version
that ToolStation do as p/n 82687 etc.

Incidentally I notice TS do a thumbturn footprint-pattern wrench as well
(p/n 53447 etc), a lot cheaper than plumbworld's (but maybe made of cheese)

In article ,
   Doctor Evil  wrote:

> > > http://www.plumbworld.co.uk/618-1533
> >
> > Hate those sort of wrenches. What's wrong with a Stillson type?

> This man has clearly never touched a piece of pipe in his life.


You use a wrench on pipe? Is this the same sort of thing as cutting
plastic pipe with a hacksaw?

-- 
*Out of my mind.  Back in five minutes.

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article <428f2801$1$72550$892e7fe2@authen.white.readfreenews.net>,
   :::Jerry::::  wrote:

> > Hate those sort of wrenches. What's wrong with a Stillson type?
> >

> Agreed, but having a smaller jaw thickness they can be used in places
> were the deeper Stillson type wrench will not fit.


I use waterpump pliers for this.

-- 
*I went to school to become a wit, only got halfway through.

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article ,
   Doctor Evil  wrote:

> Footprints are for small bore iron pipes. They are very good at what
> they are intended for, which is gripping the pipe. They are not for nuts
> and the likes.


So you still use iron barrel? Well, at least your hacksaw is some use
there...

-- 
*Remember: First you pillage, then you burn.  

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article <J5Gje.13720$hn5.6194@newsfe2-win.ntli.net>,
   John Stumbles  wrote:

> As someone else said footprint-pattern are narrower. They also let you
> get a bit of a grip on the pipe by squeezing the handles whereas
> Stillsons only tighten as you turn them, so they can fall off before
> they've got a good grip. However I think there's an inherent weakness in
> the design of the Stillson pattern: I nearly wrecked one (admittedly a
> cheap clone) trying to give it some extra welly with a bit of scaffold
> pole, and the sort of square collar bit started to split where the pivot
> pin goes through it. 


Extending a footprint with scaffold pole would have had a better result?

Cheap Stillsons are usually a waste of space. The jaws ain't hard enough,
and as you say the pivot pin may break. So you use a decent quality larger
pair instead of the scaffold pole.

-- 
*Why doesn't glue stick to the inside of the bottle?

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

":::Jerry::::"  wrote in message
news:428f2801$1$72550$892e7fe2@authen.white.readfreenews.net...

>
> "Dave Plowman (News)"  wrote in message
> news:4d6e7d3b18dave@davenoise.co.uk...
> > In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
> >    Arthur  wrote:
> > > Anybody tried these?
> >
> > > http://www.plumbworld.co.uk/618-1533
> >
> > Hate those sort of wrenches. What's wrong with a Stillson type?
> >
>
> Agreed, but having a smaller jaw thickness they can be used in places
> were the deeper Stillson type wrench will not fit.


Another one who hasn't a clue.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Dave Plowman (News)"  wrote in message
news:4d6e86b9b8dave@davenoise.co.uk...

> In article ,
>    Doctor Evil  wrote:
> > > > http://www.plumbworld.co.uk/618-1533
> > >
> > > Hate those sort of wrenches. What's wrong with a Stillson type?
>
> > This man has clearly never touched a piece of pipe in his life.
>
> You use a wrench on pipe? Is this the same sort of thing as cutting
> plastic pipe with a hacksaw?


Yes, for you that is what you do.  You us footprints on plastic pipe. Please
do.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Dave Plowman (News)"  wrote in message
news:4d6e870765dave@davenoise.co.uk...

> In article ,
>    Doctor Evil  wrote:
> > Footprints are for small bore iron pipes. They are very good at what
> > they are intended for, which is gripping the pipe. They are not for nuts
> > and the likes.
>
> So you still use iron barrel?


Iron barrel?  What are you babbling about?  Don't answer, please do not.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Dave Plowman (News)"  wrote in message
news:4d6e86b9b8dave@davenoise.co.uk...

> In article ,
>    Doctor Evil  wrote:
> > > > http://www.plumbworld.co.uk/618-1533
> > >
> > > Hate those sort of wrenches. What's wrong with a Stillson type?
>
> > This man has clearly never touched a piece of pipe in his life.
>
> You use a wrench on pipe?


Well, I'm no IMM and I have used wrenches on steel / iron pipe, where
one is threaded into another - how else are you going to tighten undo
an inline coupler for example ?

"Doctor Evil"  wrote in message
news:428f3372@news.usenetzone.com...

>
> ":::Jerry::::"  wrote in message
> news:428f2801$1$72550$892e7fe2@authen.white.readfreenews.net...
> >
> > "Dave Plowman (News)"  wrote in message
> > news:4d6e7d3b18dave@davenoise.co.uk...
> > > In article <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>,
> > >    Arthur  wrote:
> > > > Anybody tried these?
> > >
> > > > http://www.plumbworld.co.uk/618-1533
> > >
> > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > >
> >
> > Agreed, but having a smaller jaw thickness they can be used in
places
> > were the deeper Stillson type wrench will not fit.
>
> Another one who hasn't a clue.
>


Your the one without clue, considering that you are jumping in and
criticising when you don't even know why or where I was using them.

"Dave Plowman (News)"  wrote in message
news:4d6e86e0a7dave@davenoise.co.uk...

> In article

<428f2801$1$72550$892e7fe2@authen.white.readfreenews.net>,

>    :::Jerry::::  wrote:
> > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > >
>
> > Agreed, but having a smaller jaw thickness they can be used in
places
> > were the deeper Stillson type wrench will not fit.
>
> I use waterpump pliers for this.
>


Water pump pliers don't always grip, I found that 'Footprint' wrenches
will grip like a Stillson does. I will add this though, what I was
using them for was a certain job many years ago, I would normally use
either water pump pliers or a Stillson wrench - all I'm saying is that
they do have their uses.

"Dave Plowman (News)"  wrote in message 
news:4d6e86b9b8dave@davenoise.co.uk...
....

> You use a wrench on pipe? ...


Despite who prompted that enquiry, I must say that I doubt I could have 
built the compressed air system in my factories without a couple of Stilson 
wrenches; one to hold the threaded steel pipe and the other to hold the 
coupling or joint.

Colin Bignell

Dave Plowman (News) wrote:


> In article <J5Gje.13720$hn5.6194@newsfe2-win.ntli.net>,
>    John Stumbles  wrote:
>> As someone else said footprint-pattern are narrower. They also let you
>> get a bit of a grip on the pipe by squeezing the handles whereas
>> Stillsons only tighten as you turn them, so they can fall off before
>> they've got a good grip. However I think there's an inherent weakness in
>> the design of the Stillson pattern: I nearly wrecked one (admittedly a
>> cheap clone) trying to give it some extra welly with a bit of scaffold
>> pole, and the sort of square collar bit started to split where the pivot
>> pin goes through it.
> 
> Extending a footprint with scaffold pole would have had a better result?


Didn't have a footprint then so I wouldn't know: possibly the jaws might
have slipped but I doubt that the tool would have broken.


> Cheap Stillsons are usually a waste of space. The jaws ain't hard enough,
> and as you say the pivot pin may break. So you use a decent quality larger
> pair instead of the scaffold pole.


I know, I know. But I was in the middle of a job and found I had to get into
this b*st*rd screwed iron or steel pipe for water and of course rusted up
to sodomy and I only had one weeny stillson. After that I bought the
cuff-off-great 24" wrench which hasn't failed me yet: definitely a case of
"If in doubt use a bigger hammer" :-)

:::Jerry:::: wrote:


> 
> "Dave Plowman (News)"  wrote in message
> news:4d6e86e0a7dave@davenoise.co.uk...
>> In article
> <428f2801$1$72550$892e7fe2@authen.white.readfreenews.net>,
>>    :::Jerry::::  wrote:
>> > > Hate those sort of wrenches. What's wrong with a Stillson type?
>> > >
>>
>> > Agreed, but having a smaller jaw thickness they can be used in
> places
>> > were the deeper Stillson type wrench will not fit.
>>
>> I use waterpump pliers for this.
>>
> 
> Water pump pliers don't always grip, I found that 'Footprint' wrenches
> will grip like a Stillson does. I will add this though, what I was
> using them for was a certain job many years ago, I would normally use
> either water pump pliers or a Stillson wrench - all I'm saying is that
> they do have their uses.


Agreed: footprints, stillsons and similar self-gripping wrenches are the
only things to use for screwed iron.

In message <d6n3lg$spt$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com>, Arthur 
 writes

>Anybody tried these?
>
>http://www.plumbworld.co.uk/618-1533


Not really what I'd call new

They work well if used the right way round

-- 
geoff

In article , "Dave Plowman (News)" 
dave@davenoise.co.uk says...

> In article ,
>    Doctor Evil  wrote:
> > > > http://www.plumbworld.co.uk/618-1533
> > >
> > > Hate those sort of wrenches. What's wrong with a Stillson type?
> 
> > This man has clearly never touched a piece of pipe in his life.
> 
> You use a wrench on pipe?


What do you think a pipe wrench is for?

On Sat, 21 May 2005 13:58:49 +0100, "Dave Plowman (News)"
 wrote:


>Cheap Stillsons are usually a waste of space. The jaws ain't hard enough,
>and as you say the pivot pin may break. So you use a decent quality larger
>pair instead of the scaffold pole.


I've got a 3' (approx) Stillson - who needs scaffolding pole?   

Ok - we actually got it for the distance the jaws open - it's perfect
for the nut on the stern gland on our canal boat, which must be over 3"
diameter.   You don't really need much leverage.

It's ancient, slightly rusty, and cost a few quid from a market stall.
-- 
On-line canal route planner: http://www.canalplan.org.uk

(Waterways World site of the month, April 2001)

"Nick Atty"  wrote in message
news:89au81lia01u5q4p0jt35c83fdjogcrtk0@4ax.com...

> On Sat, 21 May 2005 13:58:49 +0100, "Dave Plowman (News)"
>  wrote:
>
> >Cheap Stillsons are usually a waste of space. The jaws ain't hard enough,
> >and as you say the pivot pin may break. So you use a decent quality
larger
> >pair instead of the scaffold pole.
>
> I've got a 3' (approx) Stillson - who needs scaffolding pole?
>
> Ok - we actually got it for the distance the jaws open - it's perfect
> for the nut on the stern gland on our canal boat, which must be over 3"
> diameter.   You don't really need much leverage.
>
> It's ancient, slightly rusty, and cost a few quid from a market stall.


And chews up the nut.  Use the right tool for the right job.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Rob Morley"  wrote in message
news:MPG.1cf9998db4b4873698ac5f@news.individual.net...

> In article , "Dave Plowman (News)"
> dave@davenoise.co.uk says...
> > In article ,
> >    Doctor Evil  wrote:
> > > > > http://www.plumbworld.co.uk/618-1533
> > > >
> > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> >
> > > This man has clearly never touched a piece of pipe in his life.
> >
> > You use a wrench on pipe?
>
> What do you think a pipe wrench is for?


He doesn't know these sort of things.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

On Sun, 22 May 2005 11:48:16 +0100, "Doctor Evil" 
wrote:


>
>"Nick Atty"  wrote in message
>news:89au81lia01u5q4p0jt35c83fdjogcrtk0@4ax.com...
>> On Sat, 21 May 2005 13:58:49 +0100, "Dave Plowman (News)"
>>  wrote:
>>
>> >Cheap Stillsons are usually a waste of space. The jaws ain't hard enough,
>> >and as you say the pivot pin may break. So you use a decent quality
>larger
>> >pair instead of the scaffold pole.
>>
>> I've got a 3' (approx) Stillson - who needs scaffolding pole?
>>
>> Ok - we actually got it for the distance the jaws open - it's perfect
>> for the nut on the stern gland on our canal boat, which must be over 3"
>> diameter.   You don't really need much leverage.
>>
>> It's ancient, slightly rusty, and cost a few quid from a market stall.
>
>And chews up the nut.  Use the right tool for the right job.
>

Definitely.  Such as a pipe cutter for plastic pipe for example....



-- 

..andy

To email, substitute .nospam with .gl

"Andy Hall" <andyh@hall.nospam> wrote in message
news:hps091pj4nsh93v4b5e61tnhoc3rno4qv2@4ax.com...

> On Sun, 22 May 2005 11:48:16 +0100, "Doctor Evil" 
> wrote:
>
> >
> >"Nick Atty"  wrote in message
> >news:89au81lia01u5q4p0jt35c83fdjogcrtk0@4ax.com...
> >> On Sat, 21 May 2005 13:58:49 +0100, "Dave Plowman (News)"
> >>  wrote:
> >>
> >> >Cheap Stillsons are usually a waste of space. The jaws ain't hard
enough,
> >> >and as you say the pivot pin may break. So you use a decent quality
> >larger
> >> >pair instead of the scaffold pole.
> >>
> >> I've got a 3' (approx) Stillson - who needs scaffolding pole?
> >>
> >> Ok - we actually got it for the distance the jaws open - it's perfect
> >> for the nut on the stern gland on our canal boat, which must be over 3"
> >> diameter.   You don't really need much leverage.
> >>
> >> It's ancient, slightly rusty, and cost a few quid from a market stall.
> >
> >And chews up the nut.  Use the right tool for the right job.
> >
> Definitely.  Such as a pipe cutter for plastic pipe for example....


Pipe cutters are not used on plastic pipe.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil" 
wrote:



>Pipe cutters are not used on plastic pipe.
>

Well.... according to all the manufacturers of plastic pipe they are,
but then of course you know better than they.



-- 

..andy

To email, substitute .nospam with .gl

"Andy Hall" <andyh@hall.nospam> wrote in message
news:fvl191lrpdo02369dusqdcgm4eraunr05n@4ax.com...

> On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil" 
> wrote:
>
> >Pipe cutters are not used on plastic pipe.
> >
> Well.... according to all the manufacturers of plastic pipe they are,
> but then of course you know better than they.


Pipe snippers are used on plastic pipe, as a quick method cutting.  Other
methods return the same result, as with copper, pipe cutters can be used, or
a saw and file, to obtain the same result.  Isn't clever eh.  Many ways of
doing the same thing.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

On Sun, 22 May 2005 22:34:54 +0100, "Doctor Evil" 
wrote:


>
>"Andy Hall" <andyh@hall.nospam> wrote in message
>news:fvl191lrpdo02369dusqdcgm4eraunr05n@4ax.com...
>> On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil" 
>> wrote:
>>
>> >Pipe cutters are not used on plastic pipe.
>> >
>> Well.... according to all the manufacturers of plastic pipe they are,
>> but then of course you know better than they.
>
>Pipe snippers are used on plastic pipe, as a quick method cutting. 


The manufacturers call them pipe cutters and specify them in their
instructions, disallowing other methods.   The reason is to produce a
clean, square cut.


> Other
>methods return the same result, as with copper, pipe cutters can be used, or
>a saw and file, to obtain the same result. 


I suppose that's true if you consider water pissing out on the floor
and water not pissing out on the floor as the same result.

Now I understand why you believe that J++ practices what he preaches.
You see both as the same thing.


> Isn't clever eh.  


You're right there.  It isn't clever.


>Many ways of
>doing the same thing.
>

Mmmmm.....



-- 

..andy

To email, substitute .nospam with .gl

In article ,
   Rob Morley  wrote:

> In article , "Dave Plowman (News)" 
> dave@davenoise.co.uk says...
> > In article ,
> >    Doctor Evil  wrote:
> > > > > http://www.plumbworld.co.uk/618-1533
> > > >
> > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > 
> > > This man has clearly never touched a piece of pipe in his life.
> > 
> > You use a wrench on pipe?

> What do you think a pipe wrench is for?


Pipe in this day and age refers to copper, on at least this group. I'd
rather it was called tube. But the IMM wanker will use it for any tube
capable of carrying anything - from plastic through to iron barrel.

YMMV.

-- 
*Growing old is inevitable, growing up is optional

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article , nightjar
<nightjar@<insert my surname here>.uk.com> wrote:

> "Dave Plowman (News)"  wrote in message
> news:4d6e86b9b8dave@davenoise.co.uk... ...
> > You use a wrench on pipe? ...

> Despite who prompted that enquiry, I must say that I doubt I could have
> built the compressed air system in my factories without a couple of
> Stilson wrenches; one to hold the threaded steel pipe and the other to
> hold the coupling or joint.


Well, yes. But the IMM freak was talking about only using a Footprint
wrench for this.

-- 
*Why don't you ever see the headline "Psychic Wins Lottery"?

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article <RzKje.11166$X86.5469@newsfe2-gui.ntli.net>, John Stumbles
 wrote:

> > Extending a footprint with scaffold pole would have had a better
> > result?

> Didn't have a footprint then so I wouldn't know: possibly the jaws might
> have slipped but I doubt that the tool would have broken.


I doubt a footprint type tool would have gripped under those conditions.
Because it requires pressure on the handles at all times - unlike a
Stillson.

-- 
*The only difference between a rut and a grave is the depth.

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

"Andy Hall" <andyh@hall.nospam> wrote in message
news:v50291pdibma9q7isurdn1u12k80f18aik@4ax.com...

> On Sun, 22 May 2005 22:34:54 +0100, "Doctor Evil" 
> wrote:
>
> >
> >"Andy Hall" <andyh@hall.nospam> wrote in message
> >news:fvl191lrpdo02369dusqdcgm4eraunr05n@4ax.com...
> >> On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil" 
> >> wrote:
> >>
> >> >Pipe cutters are not used on plastic pipe.
> >> >
> >> Well.... according to all the manufacturers of plastic pipe they are,
> >> but then of course you know better than they.
> >
> >Pipe snippers are used on plastic pipe, as a quick method cutting.
>
> The manufacturers call them pipe cutters and specify them in their
> instructions, disallowing other methods.


No they don't, do a Google on Hepworths post.


> > Other
> >methods return the same result, as with copper, pipe cutters can be used,
or
> >a saw and file, to obtain the same result.
>
> I suppose that's true if you consider
> water pissing out on the floor
> and water not pissing out on the floor
> as the same result.


It is clear you don't know about this sort of thing.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Dave Plowman (News)"  wrote in message
news:4d6f3d689fdave@davenoise.co.uk...

> In article ,
>    Rob Morley  wrote:
> > In article , "Dave Plowman (News)"
> > dave@davenoise.co.uk says...
> > > In article ,
> > >    Doctor Evil  wrote:
> > > > > > http://www.plumbworld.co.uk/618-1533
> > > > >
> > > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > >
> > > > This man has clearly never touched a piece of pipe in his life.
> > >
> > > You use a wrench on pipe?
>
> > What do you think a pipe wrench is for?
>
> Pipe in this day and age refers to copper,


... all pipe is of copper this man has declared
... of plastic, brass, iron, he has never heard
... the wrong tools are used, to put the pipe so
... which inviariable fail and drip H2O
... with H2O pouring out of the door
... the water board people said we'll have no more
... they cut off his water and said you're a fool
... because he didn't use the appropriate tool
... his work it was clear was a great big show stopper
... because he thought all pipe was of all made of copper



_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

In message , Doctor Evil 
 writes

>
>"Dave Plowman (News)"  wrote in message
>news:4d6f3d689fdave@davenoise.co.uk...
>> In article ,
>>    Rob Morley  wrote:
>> > In article , "Dave Plowman (News)"
>> > dave@davenoise.co.uk says...
>> > > In article ,
>> > >    Doctor Evil  wrote:
>> > > > > > http://www.plumbworld.co.uk/618-1533
>> > > > >
>> > > > > Hate those sort of wrenches. What's wrong with a Stillson type?
>> > >
>> > > > This man has clearly never touched a piece of pipe in his life.
>> > >
>> > > You use a wrench on pipe?
>>
>> > What do you think a pipe wrench is for?
>>
>> Pipe in this day and age refers to copper,
>
>.. all pipe is of copper this man has declared
>.. of plastic, brass, iron, he has never heard
>.. the wrong tools are used, to put the pipe so
>.. which inviariable fail and drip H2O
>.. with H2O pouring out of the door
>.. the water board people said we'll have no more
>.. they cut off his water and said you're a fool
>.. because he didn't use the appropriate tool
>.. his work it was clear was a great big show stopper
>.. because he thought all pipe was of all made of copper
>

They said that to you, I presume

dIMM, the hacksaw king, eh ?

-- 
geoff

"raden"  wrote in message
news:m$eSTuxxlRkCFwlB@ntlworld.com...

> In message , Doctor Evil
>  writes
> >
> >"Dave Plowman (News)"  wrote in message
> >news:4d6f3d689fdave@davenoise.co.uk...
> >> In article ,
> >>    Rob Morley  wrote:
> >> > In article , "Dave Plowman (News)"
> >> > dave@davenoise.co.uk says...
> >> > > In article ,
> >> > >    Doctor Evil  wrote:
> >> > > > > > http://www.plumbworld.co.uk/618-1533
> >> > > > >
> >> > > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> >> > >
> >> > > > This man has clearly never touched a piece of pipe in his life.
> >> > >
> >> > > You use a wrench on pipe?
> >>
> >> > What do you think a pipe wrench is for?
> >>
> >> Pipe in this day and age refers to copper,
> >
> >.. all pipe is of copper this man has declared
> >.. of plastic, brass, iron, he has never heard
> >.. the wrong tools are used, to put the pipe so
> >.. which inviariable fail and drip H2O
> >.. with H2O pouring out of the door
> >.. the water board people said we'll have no more
> >.. they cut off his water and said you're a fool
> >.. because he didn't use the appropriate tool
> >.. his work it was clear was a great big show stopper
> >.. because he thought all pipe was of all made of copper
> >
> They said that to you, I presume


Maxie, you have to read the thread again.  You have lost it again.  What are
you wearing Maxie?


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

In message , Doctor Evil 
 writes

>> >>
>> >> Pipe in this day and age refers to copper,
>> >
>> >.. all pipe is of copper this man has declared
>> >.. of plastic, brass, iron, he has never heard
>> >.. the wrong tools are used, to put the pipe so
>> >.. which inviariable fail and drip H2O
>> >.. with H2O pouring out of the door
>> >.. the water board people said we'll have no more
>> >.. they cut off his water and said you're a fool
>> >.. because he didn't use the appropriate tool
>> >.. his work it was clear was a great big show stopper
>> >.. because he thought all pipe was of all made of copper
>> >
>> They said that to you, I presume
>
>Maxie, you have to read the thread again.


No, I've already had a laugh


>You have lost it again.  What are
>you wearing Maxie?
>

Me ?

I'm stark bollock naked

does that excite you ?

-- 
geoff

In article , "Dave Plowman (News)" 
dave@davenoise.co.uk says...

> In article ,
>    Rob Morley  wrote:
> > In article , "Dave Plowman (News)" 
> > dave@davenoise.co.uk says...
> > > In article ,
> > >    Doctor Evil  wrote:
> > > > > > http://www.plumbworld.co.uk/618-1533
> > > > >
> > > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > > 
> > > > This man has clearly never touched a piece of pipe in his life.
> > > 
> > > You use a wrench on pipe?
> 
> > What do you think a pipe wrench is for?
> 
> Pipe in this day and age refers to copper, on at least this group.


That's an interesting notion, did you read it somewhere or just make 
it up yourself?

On Sun, 22 May 2005 23:36:21 +0100, "Doctor Evil" 
wrote:


>
>"Andy Hall" <andyh@hall.nospam> wrote in message
>news:v50291pdibma9q7isurdn1u12k80f18aik@4ax.com...
>> On Sun, 22 May 2005 22:34:54 +0100, "Doctor Evil" 
>> wrote:
>>
>> >
>> >"Andy Hall" <andyh@hall.nospam> wrote in message
>> >news:fvl191lrpdo02369dusqdcgm4eraunr05n@4ax.com...
>> >> On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil" 
>> >> wrote:
>> >>
>> >> >Pipe cutters are not used on plastic pipe.
>> >> >
>> >> Well.... according to all the manufacturers of plastic pipe they are,
>> >> but then of course you know better than they.
>> >
>> >Pipe snippers are used on plastic pipe, as a quick method cutting.
>>
>> The manufacturers call them pipe cutters and specify them in their
>> instructions, disallowing other methods.
>
>No they don't, do a Google on Hepworths post.



I see.  Clearly there's Scotch mist around

http://www.hep2o.co.uk/v2Opipecutting1.cfm



>
>> > Other
>> >methods return the same result, as with copper, pipe cutters can be used,
>or
>> >a saw and file, to obtain the same result.
>>
>> I suppose that's true if you consider
>> water pissing out on the floor
>> and water not pissing out on the floor
>> as the same result.
>
>It is clear you don't know about this sort of thing.
>

Mmmmm.....



-- 

..andy

To email, substitute .nospam with .gl

"Dave Plowman (News)"  wrote in message
news:4d6f3c7dabdave@davenoise.co.uk...

> In article , nightjar
> <nightjar@<insert my surname here>.uk.com> wrote:
> > "Dave Plowman (News)"  wrote in message
> > news:4d6e86b9b8dave@davenoise.co.uk... ...
> > > You use a wrench on pipe? ...
>
> > Despite who prompted that enquiry, I must say that I doubt I could
have
> > built the compressed air system in my factories without a couple
of
> > Stilson wrenches; one to hold the threaded steel pipe and the
other to
> > hold the coupling or joint.
>
> Well, yes. But the IMM freak was talking about only using a
Footprint
> wrench for this.
>


Dave, just because you haven't found a use for the tool please don't
assume that there isn't at least one use, they do work and as their
over all width is thinner than Stilson wrenches there ARE a few
situations were a 'Footprint' wrench works better - coupled to the
fact that they can be forced to grip the pipe using one hand [1],
something you might like to consider when you are 20 ft up a ladder
with nothing but engineering brick solid steel below...

[1] the teeth on the jaws also tend to 'bite' better than water pump
pliers.

"Dave Plowman (News)"  wrote in message
news:4d6f3d689fdave@davenoise.co.uk...

> In article ,
>    Rob Morley  wrote:
> > In article , "Dave Plowman (News)"
> > dave@davenoise.co.uk says...
> > > In article ,
> > >    Doctor Evil  wrote:
> > > > > > http://www.plumbworld.co.uk/618-1533
> > > > >
> > > > > Hate those sort of wrenches. What's wrong with a Stillson
type?
> > >
> > > > This man has clearly never touched a piece of pipe in his
life.
> > >
> > > You use a wrench on pipe?
>
> > What do you think a pipe wrench is for?
>
> Pipe in this day and age refers to copper, on at least this group.
I'd
> rather it was called tube. But the IMM wanker will use it for any
tube
> capable of carrying anything - from plastic through to iron barrel.
>


Sorry Dave, but IMO you are frantically trying to dig your way out,
trouble is you only seem to be digging deeper....

John Stumbles wrote:


> to sodomy and I only had one weeny stillson. After that I bought the
> cuff-off-great 24" wrench which hasn't failed me yet: definitely a case of
> "If in doubt use a bigger hammer" :-)


Somewhat OT, but was in a local branch of Ernest Doe (agricultural 
engineers) the other week sourcing replacemnt bits for my mower. While 
waiting for the chap to locate the spares I wanted I was idly looking 
round the shop. They had a diplay of adjustable spanners on a large peg. 
With the smallest ones to the front of the peg, and then every few 
spanners back they had the next size up.

The last one on the peg was the single largest f*off adjustable spanner 
I have ever seen - must have had a 3' long shaft and jaws that would 
open to 6" wide or more! Did not look at the price although I expect I 
would not want to know!

-- 
Cheers,

John.

/=================================================================\
|          Internode Ltd -  http://www.internode.co.uk            |
|-----------------------------------------------------------------|
|        John Rumm - john(at)internode(dot)co(dot)uk              |
\=================================================================/

":::Jerry::::"  wrote in message
news:429193ad$0$16947$892e7fe2@authen.white.readfreenews.net...

>
> "Dave Plowman (News)"  wrote in message
> news:4d6f3d689fdave@davenoise.co.uk...
> > In article ,
> >    Rob Morley  wrote:
> > > In article , "Dave Plowman (News)"
> > > dave@davenoise.co.uk says...
> > > > In article ,
> > > >    Doctor Evil  wrote:
> > > > > > > http://www.plumbworld.co.uk/618-1533
> > > > > >
> > > > > > Hate those sort of wrenches. What's wrong with a Stillson
> type?
> > > >
> > > > > This man has clearly never touched a piece of pipe in his
> life.
> > > >
> > > > You use a wrench on pipe?
> >
> > > What do you think a pipe wrench is for?
> >
> > Pipe in this day and age refers to copper, on at least this group.
> I'd
> > rather it was called tube. But the IMM wanker will use it for any
> tube
> > capable of carrying anything - from plastic through to iron barrel.
> >
>
> Sorry Dave, but IMO you are frantically trying to dig your way out,
> trouble is you only seem to be digging deeper....


Dig deeper?  He has been buried for years.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Andy Hall" <andyh@hall.nospam> wrote in message
news:uqv291phm9dvknr3355obkp1uogbqdkcco@4ax.com...

> On Sun, 22 May 2005 23:36:21 +0100, "Doctor Evil" 
> wrote:
>
> >
> >"Andy Hall" <andyh@hall.nospam> wrote in message
> >news:v50291pdibma9q7isurdn1u12k80f18aik@4ax.com...
> >> On Sun, 22 May 2005 22:34:54 +0100, "Doctor Evil" 
> >> wrote:
> >>
> >> >
> >> >"Andy Hall" <andyh@hall.nospam> wrote in message
> >> >news:fvl191lrpdo02369dusqdcgm4eraunr05n@4ax.com...
> >> >> On Sun, 22 May 2005 17:41:03 +0100, "Doctor Evil"

> >> >> wrote:
> >> >>
> >> >> >Pipe cutters are not used on plastic pipe.
> >> >> >
> >> >> Well.... according to all the manufacturers of plastic pipe they
are,
> >> >> but then of course you know better than they.
> >> >
> >> >Pipe snippers are used on plastic pipe, as a quick method cutting.
> >>
> >> The manufacturers call them pipe cutters and specify them in their
> >> instructions, disallowing other methods.
> >
> >No they don't, do a Google on Hepworths post.
>
> I see.  Clearly there's Scotch mist around
>
> http://www.hep2o.co.uk/v2Opipecutting1.cfm


I said do a Google on Hepworths posts

"The inventive can find many ways of achieving a perfectly acceptable clean,
square cut using a variety of tools.  The Hepworth Plumbing Products Team"

The Hepworth team said that above on uk.d-i-y.  Please read it six times.


> >> > Other
> >> >methods return the same result, as with copper, pipe cutters can be
used,
> >or
> >> >a saw and file, to obtain the same result.
> >>
> >> I suppose that's true if you consider
> >> water pissing out on the floor
> >> and water not pissing out on the floor
> >> as the same result.
> >
> >It is clear you don't know about this sort of thing.


Yes, It is clear you don't know about this sort of thing.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

"Rob Morley"  wrote in message
news:MPG.1cfb38819e9f9fcc98ac68@news.individual.net...

> In article , "Dave Plowman (News)"
> dave@davenoise.co.uk says...
> > In article ,
> >    Rob Morley  wrote:
> > > In article , "Dave Plowman (News)"
> > > dave@davenoise.co.uk says...
> > > > In article ,
> > > >    Doctor Evil  wrote:
> > > > > > > http://www.plumbworld.co.uk/618-1533
> > > > > >
> > > > > > Hate those sort of wrenches. What's wrong with a Stillson type?
> > > >
> > > > > This man has clearly never touched a piece of pipe in his life.
> > > >
> > > > You use a wrench on pipe?
> >
> > > What do you think a pipe wrench is for?
> >
> > Pipe in this day and age refers to copper, on at least this group.
>
> That's an interesting notion, did you read it somewhere or just make
> it up yourself?


He makes it all up.

_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account

John Rumm wrote:

> 
> The last one on the peg was the single largest f*off adjustable
> spanner I have ever seen - must have had a 3' long shaft and jaws that
> would open to 6" wide or more!


Used to use stuff like that, and bigger, when I was a marine engineer
working on diesels the size of houses. It's all relative, really.

Regards

Mark