Hi,

I'm about to remove a 4" iron soil/vent stack and replace it with plastic.

I intend to "break" the pipe at a vertical socket near to the ground and 
replace with plastic above.

What material should I use to seal the joint?

David

>What material should I use to seal the joint? 



Joint sealer?

Vortex wrote:


> I'm about to remove a 4" iron soil/vent stack and replace it with plastic.
> 
> I intend to "break" the pipe at a vertical socket near to the ground and 
> replace with plastic above.
> 
> What material should I use to seal the joint?


Wind some yarn/heavy garden twine etc round the end of the plastic pipe 
to bring its diameter up a little so that it sits comfortably in the 
base of the socket, and then fill with mortar, and flaunch off.

Some piccies here:

http://media.venda.com/wickes/ebiz/wickes/images/gil/73.pdf


-- 
Cheers,

John.

/=================================================================\
|          Internode Ltd -  http://www.internode.co.uk            |
|-----------------------------------------------------------------|
|        John Rumm - john(at)internode(dot)co(dot)uk              |
\=================================================================/