I have a door that when closed normally slams against the frame and due
to the plasterboard partitions the frame is set into the slam
reverberates around the whole flat. Other than coating the frame with
bubblewrap any ideas?

Cheers
E

On 07 Sep 2005, E wrote


> I have a door that when closed normally slams against the frame
> and due to the plasterboard partitions the frame is set into the
> slam reverberates around the whole flat. Other than coating the
> frame with bubblewrap any ideas?


Stick a bit of draught-proofing strip along the top, so that it has to 
be pushed slightly to catch?

(Might be worth a try.)

-- 
Cheers,
Harvey

E wrote:

> I have a door that when closed normally slams against the frame and
> due to the plasterboard partitions the frame is set into the slam
> reverberates around the whole flat. Other than coating the frame with
> bubblewrap any ideas?
>


That spongey self-adhesive window sealant stuff on a roll? There's probably 
a technical name for it :)

Si

On 07 Sep 2005, Mungo "two sheds" Toadfoot wrote


> E wrote:
>> I have a door that when closed normally slams against the frame
>> and due to the plasterboard partitions the frame is set into the
>> slam reverberates around the whole flat. Other than coating the
>> frame with bubblewrap any ideas?
>> 
> 
> That spongey self-adhesive window sealant stuff on a roll? There's
> probably a technical name for it :)


Great minds and all that.

(That's what I meant in my post -- you buy it for draught-proofing.)

-- 
Cheers,
Harvey

Harvey Van Sickle wrote:

> On 07 Sep 2005, Mungo "two sheds" Toadfoot wrote
>
>> E wrote:
>>> I have a door that when closed normally slams against the frame
>>> and due to the plasterboard partitions the frame is set into the
>>> slam reverberates around the whole flat. Other than coating the
>>> frame with bubblewrap any ideas?
>>>
>>
>> That spongey self-adhesive window sealant stuff on a roll? There's
>> probably a technical name for it :)
>
> Great minds and all that.
>
> (That's what I meant in my post -- you buy it for draught-proofing.)


Draught proofing.....stuff! That's the...um...technical name I was trying to 
think of.

Look, I've been up since four this morning.

Si

On 07 Sep 2005, Mungo "two sheds" Toadfoot wrote

> Harvey Van Sickle wrote:
>> On 07 Sep 2005, Mungo "two sheds" Toadfoot wrote
 
>>> That spongey self-adhesive window sealant stuff on a roll?
>>> There's probably a technical name for it :)
>> 
>> Great minds and all that.
>> (That's what I meant in my post -- you buy it for
>> draught-proofing.) 
> 
> Draught proofing.....stuff! That's the...um...technical name I was
> trying to think of.
> 
> Look, I've been up since four this morning.


;)

-- 
Cheers,
Harvey

In message , 
"Mungo \"two sheds\" Toadfoot"  writes

>E wrote:
>> I have a door that when closed normally slams against the frame and
>> due to the plasterboard partitions the frame is set into the slam
>> reverberates around the whole flat. Other than coating the frame with
>> bubblewrap any ideas?
>>
>
>That spongey self-adhesive window sealant stuff on a roll? There's probably
>a technical name for it :)
>

Draught excluder ?

RS do MDPE foam rolls which are prolly a bit more robust

-- 
geoff

raden wrote:

> In message ,
> "Mungo \"two sheds\" Toadfoot"  writes
>> E wrote:
>>> I have a door that when closed normally slams against the frame and
>>> due to the plasterboard partitions the frame is set into the slam
>>> reverberates around the whole flat. Other than coating the frame
>>> with bubblewrap any ideas?
>>>
>>
>> That spongey self-adhesive window sealant stuff on a roll? There's
>> probably a technical name for it :)
>>
> Draught excluder ?
>


Leave me alone, it's been a long day.

Si

You could try moving the striking plate slightly.

If it's only a matter of a couple of mills, just push some matchsticks in 
the existing screw holes and then put the screws back in down the side of 
these. That should be enough to nudge it along a little and may be all you 
need.

> I have a door that when closed normally slams against the frame


You can get some sort of "anti-slam" mech for kitchen cupboards - you 
might be able to do something with one of them :-}

-- 
Please add the word "newsgroup" in the subject line of personal emails
**** My email address includes "ngspamtrap" and "@btinternet.com" ****

On 7 Sep 2005 13:43:43 -0700, "E"  wrote:


>I have a door that when closed normally slams against the frame and due
>to the plasterboard partitions the frame is set into the slam
>reverberates around the whole flat. Other than coating the frame with
>bubblewrap any ideas?


You can get spring loaded shock absorbing piston type things in B&Q
for use on kitchen doors. One (Or more) of these may help.

Not sure what they are called though.

sponix

E wrote:

> I have a door that when closed normally slams against the frame and due
> to the plasterboard partitions the frame is set into the slam
> reverberates around the whole flat. Other than coating the frame with
> bubblewrap any ideas?


Use a couple of those new things that "soft close" fitted kitchen
cupboard doors, or preferably a friction stay (example pictured
at: http://www.willenhall-locks.co.uk/nostal.html).