I have a Servis Caress 900 washer dryer which is making a loud screeching 
noise on the spin cycle. I`m guessing this is likely to be the bearings of 
some sort since the machine is approx 7 years old and gets loaded quite 
heavily on most washes.
How easy is it to make a repair of this kind of thing? and assuming it is 
the bearings is it a servicable part or a sealed unit?
I assume it also isn't something that could be sorted out with a tub of 
grease or a squirt of WD40 !?
Steve

> I have a Servis Caress 900 washer dryer which is making a loud screeching
> noise on the spin cycle. I`m guessing this is likely to be the bearings of
> some sort since the machine is approx 7 years old and gets loaded quite
> heavily on most washes.
> How easy is it to make a repair of this kind of thing? and assuming it is
> the bearings is it a servicable part or a sealed unit?
> I assume it also isn't something that could be sorted out with a tub of
> grease or a squirt of WD40 !?
> Steve
>

it is very common for the drain pump to screech on a sevis machine.

Check one of the online domestic appliance spares retailers to see if
you can get bearings - I would imagine they should be common and not
part of a sealed unit.

If it is the drum bearings then grease or WD40 will not be sufficient.

If it is the drum bearings then there will be a lot of wobble on the
inner drum.
You can determine if it is the drain pump or not easily as the pump and
the drum generally run at different times. If it screeches when the
drum is not spinning...

I've never done a Servis but I am now an expert with Zanussi and if it
is like Zanussi, it is not a job for your basic DIY'er.