Hi,

I wonder if anyone has found a suitable code for the latest Aldi 8 in 1 
Tevion (8910) remote, one which works with a Sky Digi box?

Surprisingly I cannot find the above in the list contained in the 
manual.

-- 

Regards,
        Harry (M1BYT) (L)
http://www.ukradioamateur.org

Look up Sky in the Sat section of the manual and try each of the codes

I'm using 278 on a Panasonic DSB30

Lakeuk pretended :

> Look up Sky in the Sat section of the manual and try each of the codes
>
> I'm using 278 on a Panasonic DSB30


Thanks......

I had failed to notice that the codes are sub-divided into different 
sections for different appliances.

Which leads on to a new problem...

In the SAT section, Sky Digital is listed as code 154. Having set this 
up it still doesn't work. I am certain I have got the right code, 
because the 154 is showing in the display when I switch to using it to 
control SAT.

Other than the above problem, surprisingly - I was not able to get the 
control (by direct code, or code search) to find a code able to control 
my new 42" Tevion plasma, or new Tevion Home Theatre audio system.

I did though manage to get it to control them by using the original 
remote and the LEARN mode. This was much easier/quicker to do than when 
I attempted to do it with its 8 in 1 predecessor. With that you had to 
go through a whole series of button presses for each key. The new one 
allows you to go though all the buttons in sequence, confirming on the 
LCD display.

-- 

Regards,
        Harry (M1BYT) (L)
http://www.ukradioamateur.org

Try code 278, this works with my Panasonic Sky Digital box, and I've
read alot of other people using 278 for Pace boxes.

What I normally do is use the auto scan function and everytime the box
goes into standby make a note of the code.  Once finished I go through
each code to decide which gives the most fuctionality/works best - this
made me settle for code 278

Harry Bloomfield wrote :

> In the SAT section, Sky Digital is listed as code 154. Having set this up it 
> still doesn't work. I am certain I have got the right code, because the 154 
> is showing in the display when I switch to using it to control SAT.


Correction....

That is the correct code after all, as I just discovered by taking the 
remote up close to the Sky digi. It seems the IR beam from remote is 
aimed up at quite a steep angle. Pointing the remote down towards the 
ground at an angle of around 30 degrees seems to work best. Which 
explains why SEARCHING failed to find the correct code.

I've just split the case to look inside and the IR LED is indeed badly 
aligned, correctly aligned it works much better :-)

-- 

Regards,
        Harry (M1BYT) (L)
http://www.ukradioamateur.org

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1aa67d592e8040d7.8412@tiscali.co.uk: 


> Lakeuk pretended :
>> Look up Sky in the Sat section of the manual and try each of the codes
>>
>> I'm using 278 on a Panasonic DSB30
> 
> Thanks......
> 
> I had failed to notice that the codes are sub-divided into different 
> sections for different appliances.
> 
> Which leads on to a new problem...
> 
> In the SAT section, Sky Digital is listed as code 154. Having set this 
> up it still doesn't work. I am certain I have got the right code, 
> because the 154 is showing in the display when I switch to using it to 
> control SAT.
> 
> Other than the above problem, surprisingly - I was not able to get the 
> control (by direct code, or code search) to find a code able to control 
> my new 42" Tevion plasma, or new Tevion Home Theatre audio system.
> 
> I did though manage to get it to control them by using the original 
> remote and the LEARN mode. This was much easier/quicker to do than when 
> I attempted to do it with its 8 in 1 predecessor. With that you had to 
> go through a whole series of button presses for each key. The new one 
> allows you to go though all the buttons in sequence, confirming on the 
> LCD display.
> 


HARRY IN FAILED TO NOTICE SOMETHING SHOCKER!

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker

"Harry Bloomfield"  verbally sodomised 
in news:mn.1abe7d597de11ca5.8412@tiscali.co.uk: 


> Harry Bloomfield wrote :
>> In the SAT section, Sky Digital is listed as code 154. Having set this
>> up it still doesn't work. I am certain I have got the right code,
>> because the 154 is showing in the display when I switch to using it to
>> control SAT. 
> 
> Correction....
> 
> That is the correct code after all, as I just discovered by taking the 
> remote up close to the Sky digi. It seems the IR beam from remote is 
> aimed up at quite a steep angle. Pointing the remote down towards the 
> ground at an angle of around 30 degrees seems to work best. Which 
> explains why SEARCHING failed to find the correct code.
> 
> I've just split the case to look inside and the IR LED is indeed badly 
> aligned, correctly aligned it works much better :-)
> 


Phew! DEFCON is back to amber.

-- 
Phil Kyle  
Uno
Dos
Tres
Cuatro
CINCO!!!!!!

"Be very aware that my willingness 
to continue to criticise your sig 
is infinite." -- Neil Barker