I need to fit some new MDF skirting since fitting a laminate floor. What is 
the neatest way of fixing it to the wall. (more than glue is needed to pull 
it in whare the walls bow in a bit).


John

john wrote:

> I need to fit some new MDF skirting since fitting a laminate floor.
> What is the neatest way of fixing it to the wall. (more than glue is
> needed to pull it in whare the walls bow in a bit).
>
>
> John


This has been covered before about skirting further down somewhere.

Not MDF mind, lets hope you don't have a flood. :-(

ben wrote:

> john wrote:
>> I need to fit some new MDF skirting since fitting a laminate floor.
>> What is the neatest way of fixing it to the wall. (more than glue is
>> needed to pull it in whare the walls bow in a bit).
>>
>>
>> John
>
> This has been covered before about skirting further down somewhere.
>
> Not MDF mind, lets hope you don't have a flood. :-(


By the way how much is that MDF skirting a foot?
5" taurus wood skirting where i am is 55p a foot.

ben wrote:
[snip]

> By the way how much is that MDF skirting a foot?
> 5" taurus wood skirting where i am is 55p a foot.


Jesus! screwfix do it for 19.99, 2.5m

5" taurus same lenght would be 4.12

In message <R64Se.101274$G8.73473@text.news.blueyonder.co.uk>, ben 
 writes

>ben wrote:
>[snip]
>> By the way how much is that MDF skirting a foot?
>> 5" taurus wood skirting where i am is 55p a foot.
>
>Jesus! screwfix do it for 19.99, 2.5m
>

Can't remember what I paid but it was nothing like that price.

It has it's benefits, it's very stable and unlikely to warp, it's nicely 
finished and primed so finishing is quick.
-- 
Chris French

In message <oT3Se.6424$k4.6063@newsfe4-win.ntli.net>, john 
 writes

>I need to fit some new MDF skirting since fitting a laminate floor. What is
>the neatest way of fixing it to the wall. (more than glue is needed to pull
>it in whare the walls bow in a bit).
>

Drill and screw or use frame fixings, fill (or plug) and sand.

Plenty of [previous threads on fixing skirting.
-- 
Chris French

"ben"  wrote in message 
news:R64Se.101274$G8.73473@text.news.blueyonder.co.uk...

> ben wrote:
> [snip]
>> By the way how much is that MDF skirting a foot?
>> 5" taurus wood skirting where i am is 55p a foot.
>
> Jesus! screwfix do it for 19.99, 2.5m
>

Perhaps theirs is genuine bull-profile, which is very expensive to make.

I can't find their MDF skirting, but, to be fair to Screwfix (why?) they 
sell softwood torus for 56p/ft (pack of 4, 2400 x 119 x 15, cat no 
91979)


-- 
Kevin Poole
**Use current month and year to reply (e.g. sep2005@mainbeam.co.uk)***
Car Transport by Tiltbed Trailer - based near Derby

In message <fJ8wmDN9+OGDNAEH@familyfrench.co.uk>, chris French 
 writes

>In message <R64Se.101274$G8.73473@text.news.blueyonder.co.uk>, ben 
> writes
>>ben wrote:
>>[snip]
>>> By the way how much is that MDF skirting a foot?
>>> 5" taurus wood skirting where i am is 55p a foot.
>>
>>Jesus! screwfix do it for 19.99, 2.5m
>>
>Can't remember what I paid but it was nothing like that price.
>
>It has it's benefits, it's very stable and unlikely to warp, it's 
>nicely finished and primed so finishing is quick.


I don't know about price but, if finished in white, it tends to *yellow* 
over time. We have re-painted since the original fitting and it now 
looks OK.

Fixing was cut nails into blockwork.

regards



-- 
Tim Lamb

Autolycus wrote:

> genuine bull-profile


What's that, then?

On Fri, 02 Sep 2005 21:55:32 GMT, "john" 
wrote:


>I need to fit some new MDF skirting since fitting a laminate floor. What is 
>the neatest way of fixing it to the wall. (more than glue is needed to pull 
>it in whare the walls bow in a bit).
>
>
>John 
>


Use a plug cutter and a counter bore bit.

(e.g. Axminster Power Tools 300532)


This will give you counterbored holes in the skirting which you can
then use to attach it to the wall with wall plugs and screws.

You then use the plug cutter and a piece of scrap skirting board
material to produce some plugs.   These are fitted into the holes with
dabs of glue and you can then sand off the surface when dry for an
invisible result.


-- 

..andy

To email, substitute .nospam with .gl

Andy Hall wrote:


> Use a plug cutter and a counter bore bit.
> 
> (e.g. Axminster Power Tools 300532)



On MDF? I understand plugging on nice hardwood skirting, and even on 
softwood skirting, but would you really bother on MDF?

-- 
Grunff

"Andy Hall" <andyh@hall.nospam> wrote in message 
news:77pih19cv71qrj9kdfuhup539h2c0vh1ev@4ax.com...

> On Fri, 02 Sep 2005 21:55:32 GMT, "john" 
> wrote:
>
>>I need to fit some new MDF skirting since fitting a laminate floor. What 
>>is
>>the neatest way of fixing it to the wall. (more than glue is needed to 
>>pull
>>it in whare the walls bow in a bit).
>>
>>
>>John
>>
>
> Use a plug cutter and a counter bore bit.
>
> (e.g. Axminster Power Tools 300532)
>
>
> This will give you counterbored holes in the skirting which you can
> then use to attach it to the wall with wall plugs and screws.
>
> You then use the plug cutter and a piece of scrap skirting board
> material to produce some plugs.   These are fitted into the holes with
> dabs of glue and you can then sand off the surface when dry for an
> invisible result.
>
>
> -- 
>
> .andy
>
> To email, substitute .nospam with .gl


Thanks - will search for previous threads. The skirting I am using is Beech 
finished MDF to match the floor.

John

"Chris Bacon"  wrote in message 
news:4319605a_2@x-privat.org...

> Autolycus wrote:
>> genuine bull-profile
>
> What's that, then?


Taurus

cf torus.

Knew I should have put a smiley.


-- 
Kevin Poole
**Use current month and year to reply (e.g. sep2005@mainbeam.co.uk)***
Car Transport by Tiltbed Trailer - based near Derby

Autolycus wrote:

> "ben"  wrote in message
> news:R64Se.101274$G8.73473@text.news.blueyonder.co.uk...
>> ben wrote:
>> [snip]
>>> By the way how much is that MDF skirting a foot?
>>> 5" taurus wood skirting where i am is 55p a foot.
>>
>> Jesus! screwfix do it for 19.99, 2.5m
>>
> Perhaps theirs is genuine bull-profile, which is very expensive to
> make.
>
> I can't find their MDF skirting, but, to be fair to Screwfix (why?)
> they sell softwood torus for 56p/ft (pack of 4, 2400 x 119 x 15, cat
> no 91979)


40/45 to do a room, in MDF
20/25 in Taurus(wood) :-)

In article <43196914$0$3556$da0feed9@news.zen.co.uk>,
   Grunff  wrote:

> On MDF? I understand plugging on nice hardwood skirting, and even on 
> softwood skirting, but would you really bother on MDF?


I would - I enjoy doing it.;-)

But filling a hole in something like MDF with any proprietary filler tends
to show through the paint to some extent.

-- 
*Learn from your parents' mistakes - use birth control.

    Dave Plowman        dave@davenoise.co.uk           London SW
                  To e-mail, change noise into sound.

In article <dfbknf$l52$1@news.freedom2surf.net>, nov2004@mainbeam.co.uk 
says...

> 
> "ben"  wrote in message 
> news:R64Se.101274$G8.73473@text.news.blueyonder.co.uk...
> > ben wrote:
> > [snip]
> >> By the way how much is that MDF skirting a foot?
> >> 5" taurus wood skirting where i am is 55p a foot.
> >
> > Jesus! screwfix do it for £19.99, 2.5m
> >
> Perhaps theirs is genuine bull-profile, which is very expensive to make.
> 
> I can't find their MDF skirting, but, to be fair to Screwfix (why?) they 
> sell softwood torus for 56p/ft (pack of 4, 2400 x 119 x 15, cat no 
> 91979)
> 

I think the skirting he's talking about is "Standard Skirting and 
Architrave 45 x 5.5mm x 2.5m", £19.99 for a pack of 10.

On Sat, 03 Sep 2005 10:12:29 +0100, Grunff  wrote:


>Andy Hall wrote:
>
>> Use a plug cutter and a counter bore bit.
>> 
>> (e.g. Axminster Power Tools 300532)
>
>
>On MDF? I understand plugging on nice hardwood skirting, and even on 
>softwood skirting, but would you really bother on MDF?



Sure.    I've done this for various forms of construction in MDF.




-- 

..andy

To email, substitute .nospam with .gl

On Sat, 03 Sep 2005 09:20:11 GMT, "john" 
wrote:


>
>Thanks - will search for previous threads. The skirting I am using is Beech 
>finished MDF to match the floor.
>
>John 
>


OK.  You should find that if you are careful with the plug cutting
that the veneer will remain stuck to the MDF.   However, the fitting
technique would be a little different.

After popping the plugs out of the piece of material used to make
them, you will need to remove some of the MDF from the back as you
can't sand the surface.  You should then be able to push the plug into
place flush with the surface using a block of wood and gently tapping
with a hammer.   Obviously practice a bit first and if there is a
noticable grain, try to align the grains of the plug and the base
material.



-- 

..andy

To email, substitute .nospam with .gl

Grunff wrote:

> Andy Hall wrote:
>> Use a plug cutter and a counter bore bit.
>> (e.g. Axminster Power Tools 300532)
> On MDF? I understand plugging on nice hardwood skirting, and even on 
> softwood skirting, but would you really bother on MDF?


Yes, and make sure the screw slots are all lined up before putting the 
plugs in.

Owain

Owain wrote:

> Grunff wrote:
> 
>> Andy Hall wrote:
>>
>>> Use a plug cutter and a counter bore bit.
>>> (e.g. Axminster Power Tools 300532)
>>
>> On MDF? I understand plugging on nice hardwood skirting, and even on 
>> softwood skirting, but would you really bother on MDF?
> 
> 
> Yes, and make sure the screw slots are all lined up before putting the 
> plugs in.
> 
> Owain
> 
> 


And greased for easy removal.....

Owain wrote:


> Yes, and make sure the screw slots are all lined up before putting the 
> plugs in.



Come on - you know I only use Torx screws...


-- 
Grunff

john wrote:

> I need to fit some new MDF skirting since fitting a laminate floor. What is 
> the neatest way of fixing it to the wall. (more than glue is needed to pull 
> it in whare the walls bow in a bit).
> 
> 
> John 
> 
> 


IMO the mdf should sit nice and straight. If your walls aren't, fill 
behind the skirting and treat the filler as part of the wall. Wavy 
skirting is just not on.

Stuart Noble wrote:

  IMO the mdf should sit nice and straight. If your walls aren't, fill

> behind the skirting and treat the filler as part of the wall. Wavy 
> skirting is just not on.


I was going to say that... but you got there first ;-)


-- 
Cheers,

John.

/=================================================================\
|          Internode Ltd -  http://www.internode.co.uk            |
|-----------------------------------------------------------------|
|        John Rumm - john(at)internode(dot)co(dot)uk              |
\=================================================================/

In message <431a7545$0$97113$ed2619ec@ptn-nntp-reader03.plus.net>, John 
Rumm  writes

>Stuart Noble wrote:
>
> IMO the mdf should sit nice and straight. If your walls aren't, fill
>> behind the skirting and treat the filler as part of the wall. Wavy 
>>skirting is just not on.
>
>I was going to say that... but you got there first ;-)
>
>

Hmm, I think it's very much depends situation, in some situations yes, 
other times I think it is better to have the skirting fitted closer to 
the wall.
-- 
Chris French

On Sun, 04 Sep 2005 05:19:52 +0100, John Rumm
 wrote:


>Stuart Noble wrote:
>
>  IMO the mdf should sit nice and straight. If your walls aren't, fill
>> behind the skirting and treat the filler as part of the wall. Wavy 
>> skirting is just not on.
>
>I was going to say that... but you got there first ;-)



It depends on how wavy the wall is.  If it's fairly gentle curves
along the whole length, then it's visually better to make the skirting
conform to the wall.


-- 

..andy

To email, substitute .nospam with .gl