Anyone know if it's possible to replace the brass valve assemblies on  a 
standard 1/2" kitchen tap (monobloc)

Where's the best place to get the parts ?

Many thanks

In article ,
	"Mackem"  writes:

> Anyone know if it's possible to replace the brass valve assemblies on  a 
> standard 1/2" kitchen tap (monobloc)
> 
> Where's the best place to get the parts ?


Many years ago, I did this on a pair of bath taps (not quarter
turn type ceramic valves).  I think I found the kits in B&Q.
If the problem is that the thread has worn at the shut-off point,
you might get some restbite by fitting replacement plastic valve
seats, which will change the position of the shut-off point on
the thread. I did this a couple of years before replacing the
whole valve head.

-- 
Andrew Gabriel

look up the makers on www or try local plumbers not sheds

-- 
regards
dave batter
www.kitchenman.co.uk
www.sxmitres.info

www.essex-sandivers.info

http://oneandone.co.uk/xml/init?k_id5568652

"Mackem"  wrote in message
news:7IydnZsp1P4S03LfRVnyrw@pipex.net...

> Anyone know if it's possible to replace the brass valve assemblies on  a
> standard 1/2" kitchen tap (monobloc)
>
> Where's the best place to get the parts ?
>
> Many thanks
>
>
>