I am fed up climbing up the outside of my house to do roof repairs (Its a
very big, very old roof). I am going to cut an access panel in the flat roof
part so that I can get access from the loft space.

Does any one have any experience of installing a skylight in a flat roof ? I
have looked at some commercial options (e.g. Velux) but they are either very
expensive or do not come small enough for my needs. The space I have to play
with between roof trusses and bracing limits the access to 370mm by 650mm
which is tight but big enough for me.

Obvious problems are getting an angle to run off water, the design of the
removeable top and making it sturdy enough for a svelte 15 stoner like
myself to haul through.

Any thoughts or useful sites to visit would be appreciated.

Thanks,

Gil

"Gil"  wrote in message
news:Ncgue.513$Ar5.154@newsfe5-win.ntli.net...

> I am fed up climbing up the outside of my house to do roof repairs (Its a
> very big, very old roof). I am going to cut an access panel in the flat
roof
> part so that I can get access from the loft space.
>
> Does any one have any experience of installing a skylight in a flat roof ?
I
> have looked at some commercial options (e.g. Velux) but they are either
very
> expensive or do not come small enough for my needs. The space I have to
play
> with between roof trusses and bracing limits the access to 370mm by 650mm
> which is tight but big enough for me.
>
> Obvious problems are getting an angle to run off water, the design of the
> removeable top and making it sturdy enough for a svelte 15 stoner like
> myself to haul through.
>
> Any thoughts or useful sites to visit would be appreciated.
>
> Thanks,
>
> Gil
>

Cut out a section of the roof between the beams, then fix in place some
battens that will create a good upstand above the outside of the roof.  Felt
over and seal all of this new build.  Now build a hatch with hinges to fit
snuggly over the top of it, and felt and seal all of that as well.  TahDah
!!!  One hatch for the use of, Sir.

Something like floor boards or flooring grade chip-board will be enough to
make a strong lip around the opening you make.

"BigWallop"  wrote in message
news:TGgue.54598$G8.21640@text.news.blueyonder.co.uk...

>
> "Gil"  wrote in message
> news:Ncgue.513$Ar5.154@newsfe5-win.ntli.net...
> > I am fed up climbing up the outside of my house to do roof repairs (Its
a
> > very big, very old roof). I am going to cut an access panel in the flat
> roof
> > part so that I can get access from the loft space.
> >
> > Does any one have any experience of installing a skylight in a flat roof
?
> I
> > have looked at some commercial options (e.g. Velux) but they are either
> very
> > expensive or do not come small enough for my needs. The space I have to
> play
> > with between roof trusses and bracing limits the access to 370mm by
650mm
> > which is tight but big enough for me.
> >
> > Obvious problems are getting an angle to run off water, the design of
the
> > removeable top and making it sturdy enough for a svelte 15 stoner like
> > myself to haul through.
> >
> > Any thoughts or useful sites to visit would be appreciated.
> >
> > Thanks,
> >
> > Gil
> >
> Cut out a section of the roof between the beams, then fix in place some
> battens that will create a good upstand above the outside of the roof.
Felt
> over and seal all of this new build.  Now build a hatch with hinges to fit
> snuggly over the top of it, and felt and seal all of that as well.  TahDah
> !!!  One hatch for the use of, Sir.
>
> Something like floor boards or flooring grade chip-board will be enough to
> make a strong lip around the opening you make.
>
>

Velux roof lights are not designed for flat roofs. The only way to fit a
velux roof light in a flat roof is to pitch up a frame to support the velux
at a angle slope.
Do as Big Wallop states, but in stead of make the lid hinged, make the lid
fit over the opening with sliding bolts into the frame. this will stop
intruders getting in and the lid blowing of in the wind.  The only problem
with cutting holes in flat roofs is making them watertight on the corners..