Re: Suunto Vitek Ascent rates
Thu, 11 Jun 2009 08:09:41 +0000 (UTC)
Hello Ian,
> On Wed, 10 Jun 2009 21:56:27 -0400 in uk.rec.scuba, Lee Bell says:
>
>>> What sort of ascent rate does the Vitek use?
>>>
>> Slow, very slow. Several of us have been shouting warnings about the
>> ultra conservative Suunto computers for years. Check out your
>> partial pressure and depth limi ...
|
Re: Suunto Vitek Ascent rates
Thu, 11 Jun 2009 07:59:59 +0000 (UTC)
Hello Blah,
> rmacrae wrote:
>
>> Hello Blah,
>> No this is an old Vitek and it doesn't have deep stop mode.
>> When I left the bottom it told me my cielling was 3M, nothing before
>> that.
>> I was on 30% nitrox, the max for that depth.
>> Ron.
>>
> Therein lies your problem - my Suunto simulation for 3 ...
|
Re: Suunto Vitek Ascent rates
Wed, 10 Jun 2009 21:01:31 +0000 (UTC)
Hello Blah,
No this is an old Vitek and it doesn't have deep stop mode.
When I left the bottom it told me my cielling was 3M, nothing before that.
I was on 30% nitrox, the max for that depth.
Ron.
> Ron MacRae wrote:
>
>> I did a dive at the weekend on the Frognor, which is about 35m.
>> Aft ...
|
Suunto Vitek Ascent rates
Wed, 10 Jun 2009 05:12:35 -0700 (PDT)
I did a dive at the weekend on the Frognor, which is about 35m. After
29 minutes, and with 10 minutes required to reach the surface, my
buddy and I set off from 34m. It took us 5 mins to reach 6m, which
works out at an ascent rate of less than 6M/min. Looking at the
profile on my PC the ascent is as close to a c ...
|
Re: AT&T Usenet Netnews Service Shutting Down
Mon, 8 Jun 2009 11:37:00 -0400
> Distribution: AT&T SouthEast Newsgroups Servers
> Please note that on or around July 15, 2009, AT&T will no longer be
> offering access to the Usenet Netnews service. If you wish to continue
> reading Usenet newsgroups, access is available through third-party
> vendors.
>
> Distribution: AT&T SouthEast Newsgr ...
|
Re: AT&T Usenet Netnews Service Shutting Down
Mon, 8 Jun 2009 11:36:09 -0400
> Please note that on or around July 15, 2009, AT&T will no longer be
> offering access to the Usenet Netnews service. If you wish to continue
> reading Usenet newsgroups, access is available through third-party
> vendors.
>
> Distribution: AT&T SouthEast Newsgroups Servers
I have had a long and satisfactory ...
|
Which fins ?
Tue, 02 Jun 2009 10:57:48 +0200
Hi,
I'm planning to buy fins of the Scubapro Twin family (Twin Jet, Twin Jet Max
or Twin Speed) but between the different models I don't know which is the best
for me.
My primary need is to find a model which will offers correct performances but
which minimal efforts (I have some problems on laps and need ...
|
WinPC Defener (fake antivirus) removal
Sat, 23 May 2009 22:27:26 -0700 (PDT)
WINPc Defender is a fake antivirus. anybody whos pc is infected byw in
pc defender, should remove this fake program manually, see removal
guide
http://darfuns.com/spyware-removal/remove-win-pc-defender-manually/ ...
|
Can you run an air wrench of a scuba tank?
Thu, 21 May 2009 14:38:06 +0100
I know air tools only need 6 bar or so, so 200 bar straight off a tank
might be a bit overkill, but is it practical? Or would you run it off
2nd stage hose?
I need to strip down a couple of cars (so no overtightening
considerations), is this feasible? ...
|
Re: Diving in Dominican Republic
Mon, 11 May 2009 08:07:51 +0100
Have a look here:
http://www.bsac.com/findit.asp?cat=tripreports§ion=0001000100150047&view=list&glat=&glng=&gzoom=&keyword=Dominica&submit.x=54&submit.y=8
You may find something of interest.
Eddie
"Tim Gardner" <timgardner@hotmail.com> wrote in message
news:_O0Ml.45344$hI7.2827@newsfe28.ams2...
> Goi ...
|
