RC ESC & LiPo for a DIY Golf Cart?!
Sun, 15 Oct 2006 10:59:37 +0100
Hi there chaps, wondering if I can pick your brains again!
I have a golf cart which I'm thinking to convert to LiPo, the cart already
has a throttle pot on the handle, so is it possible to connect that in some
way (or even find a suitable adjustable pot/switch) so that it directly
controls the ESC?, (Castle ...
|
Brushless development Kit - what do you expect?
13 Oct 2006 08:11:41 -0700
Hello,
I offer a Brushless Development Kit. This Development Kit is based on a
CD. This CD contains
- complete sourcecode for a sensorless brushless ESC
- layouts for the plates
- in-depth introduction to the sensorless brushless control
fundamentals
- tools for development
you can get more information ...
|
The best RC flying I have ever seen
Fri, 13 Oct 2006 18:18:12 +1000
If you find a flying clip better than this one, I'd like to hear about it.
http://www.metacafe.com/watch/133566/trick_airplane_indoor_competition/
This wasnt me by the way. Just found it on metacafe.
Its absolutely crazy!!
...
|
Complete outfit for sale on Ebay.
Mon, 09 Oct 2006 13:51:41 +0100
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=010&item=200033706720&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 ...
|
Strange Behaviour.... Phoenix Models Extra 330s EP
Mon, 09 Oct 2006 06:23:59 GMT
Wondering if anyone has any explanation for my problem.....
Ive recently purchased an EXTRA 330s Electric (much like the mini katana)
made by Phoenix Models. I set it up with electric gear:
Novatech 25amp ESC
4 x Hitec HS55
Hitec Mini RX
E-Flite 480 Brushless
It lasted about 5secs in the air on its maid ...
|
OS 52 FS
Sun, 8 Oct 2006 21:07:01 +0100
I have a new OS 52 fitted into the front of my new Flair Pup and I am now
wondering if I should run it pressurised or not. I pressurise my 2 strokes
but My OS 30, Laser 50 and OS 120 all run unpressured fine.
Has anybody any best practice for this engine?
...
|
4 stroke, 1.20 class
Sun, 8 Oct 2006 10:47:35 +0100
Hello folks,
I've never used a four stroke yet, so havent got a clue.
Im just about to embark on finding a 1.20 -1.80 size 4 stroke for my glens
Cap,
Reliability and bags and bags of torque is what i'm hoping for, and weigh in
at somewhere between 750 and 900 grams,
Heres a few which I have found, so ...
|
JP EDF Tiger Shark - opinions?
Fri, 06 Oct 2006 20:20:44 GMT
I'm quite tempted by one of these purely from watching this video;
http://www.jperkinsdistribution.co.uk/downloads/5500400a.wmv
For a hundred quid including the brushless motor, esc & fan it looks like a
pretty good deal. Does anyone have any info on it?
Don't worry, even *I* wouldn't fly this around the ...
|
For Sale - Carbon fiber rods .050" and .060" x 36" @ $1.25 each
Wed, 04 Oct 2006 07:43:56 -0600
I have plenty of those nifty carbon rods at $1.25 each
Ideal for reinforcing balsa structures, Shockfliers, foamies, and for
small pushrods.
Each .060"rod weight only 3grams !
The cost of shipping for 1 to 10 is only $3.00 anywhere in the world.
Since I can only put a max of 10 coiled in a large envelope, if ...
|
Another Video
Tue, 03 Oct 2006 21:55:04 GMT
Not aerial this time but flying the same plane the way it was meant to be
flown. I'll probably get verbal abuse for this one too - oh, look there are
other people in the park...
http://www.ninjaboy.pwp.blueyonder.co.uk/JohnBanksZoomZoom.wmv
...
|
