re cyclone cells
Tue, 28 Aug 2007 21:25:24 GMT
RS do them ,stock number 591-483,they cost about ¡ê6 each +vat
...
|
5Ah Cyclone gell cells
Tue, 28 Aug 2007 19:07:37 GMT
Does any one know of a suplier of cyclone lead acid batteries?
specifically the 5Ah single cells I used to get a supply from work as
they were used as backup batteies in our DEC PDP11's' I am after 6
Kevin
PS I have tried to Google but not much luck apart from ¡ê40 a set? ...
|
NATS NATS NATS NATS @ R.A.F. Barkston Heath
Fri, 24 Aug 2007 08:54:09 GMT
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston Heath
NATS NATS NATS NATS @ R.A.F. Barkston ...
|
Crimp connectors for electric flight
Wed, 22 Aug 2007 17:45:53 +0100
Are there standard crimp connectors for electric flight?
A friend uses 10Amp car connectors - but I have found them difficult to
get.
Halfords have 5 Amp and 15 Amp - but not 10 Amp.
I want to standardise on something that is fairly standard in the
modelling world. What do most people use?
--
Chris ...
|
Tygon Tube Horror
Wed, 22 Aug 2007 13:03:52 +0100
I have a length of tygon tube (petrol/diesel) that has gone all slimy,
almost as if it has been covered with oil. A bit of brass tube stuck in one
end has gone green where it is in contact with the tube. The tube has never
been used for anything and is about 2 years old.
Is Tygon known to do this?
...
|
Setting up workshop
Mon, 20 Aug 2007 12:21:23 +0100
Setting up workshop - any hints and tips?
What machine tools?
(I thought power fretsaw and pillar drill.)
Suggestions welcomed and appreciated.
--
Chris ...
|
What is the best glue for Depron?
Mon, 20 Aug 2007 12:19:24 +0100
What is the best glue for Depron?
Also - for joining Depron to other materials - such as Balsa or carbon?
--
Chris ...
|
Re: (IVAN): JUSTICIA y RECTITUD
Sun, 05 Aug 2007 21:20:31 GMT
Muchos gracias penis!
(Thanks very much, cock!)
...
|
Re: stabilit express
Tue, 31 Jul 2007 14:20:54 -0400
And they are rather proud of it pricewise, but when nothing else will work
stabilit express will. It will glue butter to wax paper. :-)
"Kevin" <dontemailme@ntlworld.com> wrote in message
news:n%pri.4051$vi3.1304@newsfe2-gui.ntli.net...
>D wrote:
>> What type of glue is this?
>>
>> david
> a bloody good ...
|
Re: Has the UK modeling site been washed out.
Tue, 31 Jul 2007 20:23:33 +0200
Goedendag Red and all,
www.rcmf.co.uk works fine now.
From their homepage
"OK Folks, We have narrowed the session problems down to a problem with
usergroups (god knows why though!) I can remove people with problems from
the group then reinstate them and it seems to work fine. So for the moment
instead of a ...
|
