OT: Anyone Use Hotmail
Tue, 24 Jun 2008 03:30:11 -0700 (PDT)
Just a quick plea to see if anyone else is experiencing problems with
Hotmail. I've used it for years with few problems but a coupel of days
ago it decided to delete (??) all of my messages after April 10 this
year. It has started to deliver again so I guess they are lost
forever?? Anyone have similar problems and ...
|
Saws
Sun, 22 Jun 2008 16:44:02 -0700 (PDT)
dicing saws, screen printers furnaces
http://www.ogogo123sina.cn/ ...
|
Techumse engine carb
Sun, 22 Jun 2008 14:29:38 -0700 (PDT)
I know this is slightly off topic as the engine's in a mower but I
recently bought an ex demo Bolens lawn tractor. It looked imaculate, I
suspect it had never cut any grass. Anyway, it came off eBay for about
1/2 price and worked well so I was happy. It has a 13HP Techumse
engine and replaced an old Sears mower wi ...
|
Test only-do not respond
Sun, 22 Jun 2008 17:28:07 +0100
My old Bridgeport MDI is controlled by a Heidenhain TNC145, last week we
lost the picture on the monitor, so to cut a long story short, it was
established that the problem is the TNC. I have a spare TNC145 controller,
which came with a Bridgeport series 1 interact. I have fitted this to the
MDI, and all works ok, ...
|
Circuit breaker problem
Sun, 22 Jun 2008 16:04:18 +0100
A mate of mine has a three phase supply in his works, one of the single
phase breakers is getting slightly warm and tripping randomly. It's not a
DIN rail mount, the breakers have clips at each end, one on to a locating
rail and the other to the busbar. Seems to be an obsolete design (there are
a few on eBay b ...
|
Cant see any recent posts?
Sat, 21 Jun 2008 22:56:51 +0100
For some odd reason I cant see any of the recent posts I sent, or replies
about a Heidenhain TNC controller? Must be something to do with IE7 I guess?
They must be somewhere, as a reply from Mark (thank you) was found after a
Google search found the newsgroup on http://newsgroups.derkeiler.com/
...
|
Heidenhain TNC145
Sat, 21 Jun 2008 22:21:42 +0100
My old Bridgeport MDI is controlled by a Heidenhain TNC145, last week we
lost the picture on the monitor, so to cut a long story short, it was
established that the problem is the TNC. I have a spare TNC145 controller,
which came with a Bridgeport series 1 interact. I have fitted this to the
MDI, and all works ok, ...
|
Three phase plugs and sockets for 240v
Sat, 21 Jun 2008 22:12:29 +0100
Since some recent posts have appeared on three phase issues, can
anyone help with recommendations for (correct) plugs and sockets for
240v three phase?
I'm sure everyone's familiar with the red four pin stuff on 415v
machines, but what (online) sources are there for four pin plugs and
sockets in BLUE to suit 24 ...
|
Heidenhain 145 problem
Sat, 21 Jun 2008 18:04:19 +0100
My old Bridgeport MDI is controlled by a Heidenhain TNC145, last week we
lost the picture on the monitor, so to cut a long story short, it was
established that the problem is the TNC. I have a spare TNC145 controller,
which came with a Bridgeport series 1 interact. I have fitted this to the
MDI, and all works ...
|
Re: Removing my drilling chuck
Sat, 21 Jun 2008 02:42:53 -0500
I've got the offending chuck in the freezer, where it has been for a
couple of days.......
If I get the chance I'm gonna try the 'hot water on cold metal'
approach.
I know that that the dam' thing will come out as it originally came
with an R8 adapter - I changed to M3 myself - I just hope I wasn't
tempted to p ...
|
