|
|
|
Jaguar cub
Sat, 30 Aug 2008 15:08:28 -0700 (PDT)
Anyone got a manual for an IMO Jaguar Cub,Model VC150D.It`s not listed
on IMO`s site.Can anyone confirm if this is a rebadged Fuji?
Mark. ...
|
Oxy/Acetylene - Any cheaper alternative to BOC
Sat, 30 Aug 2008 10:38:29 -0700 (PDT)
Hi all
Does anyone know if there's a cheaper way of setting up an Oxy/
Acetylene welding/brazing kit, than hiring bottles from BOC.
I have the rest of the kit - burners, goggles, regulators, hoses, anti-
flashback units, etc, etc - from the last time may late Dad and I did
serious gas welding (circa 16 years ...
|
digital ME
Fri, 29 Aug 2008 21:21:41 GMT
Am I dreaming or is there a possibility that Magicalia (knock forehead to
ground), which is a digital publisher, would put out Model Engineer in
digital form like <National Geographic> - about 100 years for a hundred
bucks? Would certainly save a lot of frustration for many - especially if
it was searchable.
Mik ...
|
Re: Shopping stuff
Thu, 28 Aug 2008 03:03:18 -0700 (PDT)
On 27 Aug, 17:47, Peter Fairbrother <zenadsl6...@zen.co.uk> wrote:
> jontom_...@hotmail.com wrote:
> > Peter
>
> > If you decide that you want to go with a ?proper? British built lathe,
> > I have a good Boxford AUD (power feeds to saddle and cross slide,
> > thread cutting gearbox, single phase from new, coolan ...
|
Chinese Whitworth?
Wed, 27 Aug 2008 14:28:42 -0700 (PDT)
I have a Clark CMD1225 mill/drill which is, I believe, a ZX25 clone
made in
Taiwan. Their current version is the CMD1225C which, I'm told, is made
in China.
I'd always assumed that the screw threads were UNC but, when I tried
to fit
new 1/2" UNC nuts to the column clamp bolts, they didn't fit. The
bolts
meas ...
|
Re: Shopping stuff
Wed, 27 Aug 2008 12:09:45 -0700 (PDT)
On 27 Aug, 17:47, Peter Fairbrother <zenadsl6...@zen.co.uk> wrote:
> jontom_...@hotmail.com wrote:
> > Peter
>
> > If you decide that you want to go with a ?proper? British built lathe,
> > I have a good Boxford AUD (power feeds to saddle and cross slide,
> > thread cutting gearbox, single phase from new, coolan ...
|
Tensile strength tester
Wed, 27 Aug 2008 19:15:46 +0100
Anyone got a machine for testing tensile strength? Could they test
something for me? Beer money available.
Thanks,
--Peter Fairbrother ...
|
Boxford AUD metric lathe for sale North west
Wed, 27 Aug 2008 11:10:51 -0700 (PDT)
Hi Guys (and ladies is any reads this)
I am selling my Boxford AUD mark 3 lathe. In very good condition
( apart from paint ). 5inch by 20 or 22 inches.metic. Gearbox and
power cross feed. fixed and travelling steadies. 3 phase. 3 and four
jaw chuck. drive plate. tailstock drill chuck four way tool post.
coolant. ...
|
Burnerd multisize oil?
Wed, 27 Aug 2008 17:41:24 GMT
Greetings All,
Anybody here have a Burnerd Multisize collet chuck? The factory
doesn't know which oil to use. It's apparently not being sold anymore
(not my model at least) though the collets are. Anyway, it's a manual
device and has a bronze ring which rides on the spinning body and is
the part that actually ope ...
|
Forthcoming Auction
Wed, 27 Aug 2008 04:04:50 -0700 (PDT)
For anyone interested, I spotted an auction of engineering equipment
coming up soon in Havant Hampshire. Bearing and Engineering Products
Ltd. Bidding is on-line. See www.apexauctions.com.
Mike ...
|
|
|
