Re: Advice on a power supply umbilical needed.
Sun, 4 Oct 2009 12:00:27 -0700 (PDT)
On Oct 4, 7:43 pm, s...@spam.com (Don Pearce) wrote:
> On Sun, 4 Oct 2009 11:37:46 -0700 (PDT), Andy Evans
>
>
>
> <performanceandme...@gmail.com> wrote:
> >On Oct 4, 5:52 pm, nos...@nospam.com (Don Pearce) wrote:
> >> On Sun, 4 Oct 2009 08:43:46 -0700 (PDT), Andy Evans
>
> >> <performanceandme...@gmail.com> ...
|
Phil's off his meds again........
Sun, 4 Oct 2009 11:58:17 -0700 (PDT)
Seems to be getting worse. ...
|
Re: Advice on a power supply umbilical needed.
Sun, 04 Oct 2009 18:43:24 GMT
On Sun, 4 Oct 2009 11:37:46 -0700 (PDT), Andy Evans
<performanceandmedia@gmail.com> wrote:
>On Oct 4, 5:52 pm, nos...@nospam.com (Don Pearce) wrote:
>> On Sun, 4 Oct 2009 08:43:46 -0700 (PDT), Andy Evans
>>
>> <performanceandme...@gmail.com> wrote:
>> >> For least noise you need to be carrying your grounds to ...
|
Andy Evans is Brain DEAD
Mon, 5 Oct 2009 00:38:17 +1100
"Andy Evans is Brain DEAD "
> I have some projects with 300b SET amps built on two chassis - power
> supply and signal chassis. Right now I'm using amphenol 4 pin AP
> series connectors for earth and HT - which is about 440v or 490vDC off
> load.
>
> I'm wondering about a simpler coax option, since I really on ...
|
David Looser is an insane LYING CUNT
Mon, 5 Oct 2009 00:10:32 +1100
"David Looser is an insane LYING CUNT "
** The maker says the connector is only *safe* for 50 volts.
http://www.amphenolaudio.com/catalogue/pdf_files/page77_78.pdf
See note 1.
" Not suitable for domestic applications above 50V "
FUCKING **** READ IT *****
YOU ** ASININE** AUTISTIC P ...
|
David Looser needs EXECUTING
Mon, 5 Oct 2009 00:10:12 +1100
"David Looser needs EXECUTING "
>
> 50V and below is called "Exra Low Voltage" as is regarded as safe to
> touch. So if there is any possibility of touching a live contact a
> connector will be rated to 50V in domestic use. For industrial
> applications, however, it is assumed that anyone using the connector is ...
|
Advice on a power supply umbilical needed.
Sat, 3 Oct 2009 15:15:28 -0700 (PDT)
I have some projects with 300b SET amps built on two chassis - power
supply and signal chassis. Right now I'm using amphenol 4 pin AP
series connectors for earth and HT - which is about 440v or 490vDC off
load.
I'm wondering about a simpler coax option, since I really only need HT
and earth (rest can be done wi ...
|
Re: EEI Austrailai - Elite EEI 500 moviong magnet pickup
Sat, 03 Oct 2009 14:45:21 GMT
On Sat, 3 Oct 2009 14:38:35 +0100, "Keith G" <ksg@moirac.adsl24.co.uk>
wrote:
>I understand what I want to understand, what you don't understand is that I
>don't bother even trying to understand what I don't want to understand.
>Savvy?
And that says it all, I'm afraid. Even that wouldn't be a problem if
yo ...
|
Re: EEI Austrailai - Elite EEI 500 moviong magnet pickup
Fri, 02 Oct 2009 12:57:19 GMT
On Fri, 2 Oct 2009 13:39:26 +0100, "Keith G" <ksg@moirac.adsl24.co.uk>
wrote:
>> That means that the reviewers/designers/makers/sellers of the arm and
>> cartridge have to tell users the (correct) values for things like arm mass
>> and compliance and damping. This information generally seems not to be
>> very
...
|
Re: EEI Austrailai - Elite EEI 500 moviong magnet pickup
Fri, 02 Oct 2009 07:32:56 GMT
On Thu, 1 Oct 2009 23:31:14 +0100, "Keith G" <ksg@moirac.adsl24.co.uk>
wrote:
>
>"Don Pearce" <nospam@nospam.com> wrote in message
>news:4ac61cc8.16164511@news.eternal-september.org...
>> On Thu, 1 Oct 2009 17:50:43 +0100, "Keith G" <ksg@moirac.adsl24.co.uk>
>> wrote:
>>
>>>I think there is some onus on the ...
|
