Re: Sun Ultra 60 or not?
Sat, 28 Jun 2008 10:34:08 +0000 (UTC)
Nataraj M Basappa <natarajmb@gmail.com> writes:
>Hi All,
> It might be dumb question for you folks who have been using SPARC
>for all along, I want to
>try SPARC hardware it will be my first venture into SPARC, i have been
>using Debian for quite sometime on x86 and plan to do the same on
>SPARC. I have don ...
|
Re: Sparc 20 Upgrade Issue
Sat, 28 Jun 2008 10:27:00 +0000 (UTC)
Steven Hirsch <snhirsch@gmail.com> writes:
>davidsworkstation@gmail.com wrote:
>> Hello Everyone,
>>
>> I am in the process of trying to upgrade my Sparc 20 with dual 150MHz
>> Ross Hypersparc CPUs. I tested the machine first with the standard
>> equipment it already had and everything works fine. Then I set ...
|
Re: Ultra 2 hanging at boot-up after 'probing sbus'
Sat, 28 Jun 2008 10:23:28 +0000 (UTC)
bronwyn_williams@hotmail.com writes:
>Since a couple of weeks I am the proud owner of an old Ultra 2.
>I successfully installed Solaris 10 and it worked all fine. Until
>yesterday: it hangs while booting.
>Going in diagnostics mode (STOP-D) I get quite a bit of output
>but it always stops and hangs after 'Probi ...
|
SERVER cant update_active sci.physics' error - inn 2.4.4 + Solaris 9
Sat, 28 Jun 2008 10:16:37 +0000 (UTC)
Hi,
My news server machine (Sun E450 running Inn 2.4.4 under Solaris 9) has
throttled itself with this bunch of error messages:
Jun 28 16:45:33 yoda innd: [ID 960860 news.error] SERVER cant update_active
sci.physics
Jun 28 16:46:22 yoda innd: [ID 297438 news.crit] SERVER throttle no matching
entry in storage ...
|
servicing DLT-8000 drive in a Sun L9 tape array - what's out there
Fri, 27 Jun 2008 14:51:43 +0000 (UTC)
Hi,
The DLT-8000 in my L9 tape array has started to run really s-l-o-w and I
suspect it's in serious need of servicing (or simple replacing with a good
DLT-8000 while it's serviced).
Are there any service kits around for DLT-8000's supplied either by Sun or
generic kits from HP (who make the L9's) or Quantu ...
|
A35100 Question
Thu, 19 Jun 2008 10:09:53 +0100
Hi,
I have an A35100 storage array connected by fibre channel to a couple of
E420s. The 420s are using veritas disk manager to manage the raw disk
space (mostly storage for Oracle datafiles).
One of the logical drives on the array is a 4 disk RAID1 array and I'm
running short of space. What I'd like to do is ...
|
Cobalt Raq 4 OS restoration problems after net-booting restore CD
Mon, 26 May 2008 07:36:39 +1000
Hi everyone,
I have succeeded in getting an OS restore CD for my Cobalt Raq 4 to
net-boot my currently-offline Raq4 via a net-connected PC, and I solved
one problem surrounding a disk drive for which the net-booted kernel would
not accept the parameters of when the drive was probed for it's specs. I
have ...
|
The Great SPARC Floppy Muddle
Wed, 21 May 2008 10:16:27 GMT
Having attempted to relocate a Flopy Drive from a SPARC-5 to an Ultra-2,
and encountered all sorts of misfeatures, bugs and incompatibilities, I
have written it all up on my website at
http://www.cs.man.ac.uk/~chl/floppy-muddle.html
Hopefully, this will provide a general guide to how SPARCs and Solaris
(mis)ha ...
|
Re: Javastation krupps
Thu, 8 May 2008 18:36:01 +0000 (UTC)
Barry OGrady <god_free_jones@yahoo.com> writes:
>On Wed, 7 May 2008 17:43:27 +0100, Pete <pete@server30077.uk2net.com> wrote:
>>On 2008-05-01, David Reichelt <Freud-Schiller@gmx.net> wrote:
>>> Hi Everybody,
>>> i got a javastation krupps. now i need the NETRA J Software. Download at sun shows nothing, does an ...
|
moving filesystems to new disk on Cobalt Raq4i
Wed, 7 May 2008 14:25:31 +1000
Hi,
I've posted this question in some forums and a couple of mailing lists but
figured I'd pose it here also...
Just wondering what the best methods are for moving filesystems off a defective
(still works but giving hard errors on some sectors) 20 GB disk in a Raq4i onto
a replacement disk? I've purchase ...
|
