Re: Sun Blade 1000/2000 and video HW
Fri, 4 Jul 2008 07:57:22 +0000 (UTC)
hackr_d@yahoo.com writes:
>Is it possible to install a PCI video card into a Blade 1000? I was
>looking into one of these on eBay, and wanted to be prepared in case
>the video card would not be so great. I do have a Creator 3D
>framebuffer, which I installed into my Ultra 2. I understand that the
>those Blad ...
|
Re: Sun Ultra 60 or not?
Fri, 4 Jul 2008 07:55:16 +0000 (UTC)
Barry OGrady <god_free_jones@yahoo.com> writes:
>On Sat, 21 Jun 2008 06:53:42 -0700 (PDT), hackr_d@yahoo.com wrote:
>>Blade 2000's with the dual 900's and up start around $500.
>>Sun Blade 2000 2x900Mhz 4GB 73GB XVR1000 DVD Kybd/Mouse US $495.00,
>I bought a Compaq DL760 for $200 Australian. It had 8 x 900 ...
|
Re: Sun Ultra 60 or not?
Thu, 3 Jul 2008 16:53:57 -0700 (PDT)
On Jun 30, 2:53 pm, "DoN. Nichols" <dnich...@d-and-d.com> wrote:
> Sun-3 machines up through some UltraSPARC systems (including the
> Ultra-5, Ultra-10 and Ultra-60, but not including the Sun Blade 1000 and
> 2000) use Sun keyboards with 5-pin mini DIN connectors, and the mouse
> plugs into the keyboard and is rou ...
|
Re: Sun Ultra 60 or not?
Sun, 29 Jun 2008 15:20:02 GMT
On Sun, 29 Jun 2008, terryc wrote:
> My 2c is that if you are going to go out and spend $$$ to buy hardware,
> then buy X86 system hardware rather than sun stuff. Especially if you have
Who said that x86 system hardware and "sun stuff" were mutually exclusive?
I'm typing this on a Sun x86-based machine.
-- ...
|
Re: Sun Ultra 60 or not?
Sat, 28 Jun 2008 10:34:08 +0000 (UTC)
Nataraj M Basappa <natarajmb@gmail.com> writes:
>Hi All,
> It might be dumb question for you folks who have been using SPARC
>for all along, I want to
>try SPARC hardware it will be my first venture into SPARC, i have been
>using Debian for quite sometime on x86 and plan to do the same on
>SPARC. I have don ...
|
Re: Sparc 20 Upgrade Issue
Sat, 28 Jun 2008 10:27:00 +0000 (UTC)
Steven Hirsch <snhirsch@gmail.com> writes:
>davidsworkstation@gmail.com wrote:
>> Hello Everyone,
>>
>> I am in the process of trying to upgrade my Sparc 20 with dual 150MHz
>> Ross Hypersparc CPUs. I tested the machine first with the standard
>> equipment it already had and everything works fine. Then I set ...
|
Re: Ultra 2 hanging at boot-up after 'probing sbus'
Sat, 28 Jun 2008 10:23:28 +0000 (UTC)
bronwyn_williams@hotmail.com writes:
>Since a couple of weeks I am the proud owner of an old Ultra 2.
>I successfully installed Solaris 10 and it worked all fine. Until
>yesterday: it hangs while booting.
>Going in diagnostics mode (STOP-D) I get quite a bit of output
>but it always stops and hangs after 'Probi ...
|
SERVER cant update_active sci.physics' error - inn 2.4.4 + Solaris 9
Sat, 28 Jun 2008 10:16:37 +0000 (UTC)
Hi,
My news server machine (Sun E450 running Inn 2.4.4 under Solaris 9) has
throttled itself with this bunch of error messages:
Jun 28 16:45:33 yoda innd: [ID 960860 news.error] SERVER cant update_active
sci.physics
Jun 28 16:46:22 yoda innd: [ID 297438 news.crit] SERVER throttle no matching
entry in storage ...
|
servicing DLT-8000 drive in a Sun L9 tape array - what's out there
Fri, 27 Jun 2008 14:51:43 +0000 (UTC)
Hi,
The DLT-8000 in my L9 tape array has started to run really s-l-o-w and I
suspect it's in serious need of servicing (or simple replacing with a good
DLT-8000 while it's serviced).
Are there any service kits around for DLT-8000's supplied either by Sun or
generic kits from HP (who make the L9's) or Quantu ...
|
A35100 Question
Thu, 19 Jun 2008 10:09:53 +0100
Hi,
I have an A35100 storage array connected by fibre channel to a couple of
E420s. The 420s are using veritas disk manager to manage the raw disk
space (mostly storage for Oracle datafiles).
One of the logical drives on the array is a 4 disk RAID1 array and I'm
running short of space. What I'd like to do is ...
|
